Overall: 2860/3983 fields covered

ADC1

0x40012000: Analog-to-digital converter

61/61 fields covered. Toggle Registers.

SR

status register

Offset: 0x0, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVR
rw 		STRT
rw 		JSTRT
rw 		JEOC
rw 		EOC
rw 		AWD
rw
Toggle Fields.

AWD

Bit 0: Analog watchdog flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

EOC

Bit 1: Regular channel end of conversion.

Allowed values:
0: NotComplete: Conversion is not complete
1: Complete: Conversion complete

JEOC

Bit 2: Injected channel end of conversion.

Allowed values:
0: NotComplete: Conversion is not complete
1: Complete: Conversion complete

JSTRT

Bit 3: Injected channel start flag.

Allowed values:
0: NotStarted: No injected channel conversion started
1: Started: Injected channel conversion has started

STRT

Bit 4: Regular channel start flag.

Allowed values:
0: NotStarted: No regular channel conversion started
1: Started: Regular channel conversion has started

OVR

Bit 5: Overrun.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

CR1

control register 1

Offset: 0x4, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OVRIE
rw 		RES
rw 		AWDEN
rw 		JAWDEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DISCNUM
rw 		JDISCEN
rw 		DISCEN
rw 		JAUTO
rw 		AWDSGL
rw 		SCAN
rw 		JEOCIE
rw 		AWDIE
rw 		EOCIE
rw 		AWDCH
rw
Toggle Fields.

AWDCH

Bits 0-4: Analog watchdog channel select bits.

Allowed values: 0-18

EOCIE

Bit 5: Interrupt enable for EOC.

Allowed values:
0: Disabled: EOC interrupt disabled
1: Enabled: EOC interrupt enabled

AWDIE

Bit 6: Analog watchdog interrupt enable.

Allowed values:
0: Disabled: Analogue watchdog interrupt disabled
1: Enabled: Analogue watchdog interrupt enabled

JEOCIE

Bit 7: Interrupt enable for injected channels.

Allowed values:
0: Disabled: JEOC interrupt disabled
1: Enabled: JEOC interrupt enabled

SCAN

Bit 8: Scan mode.

Allowed values:
0: Disabled: Scan mode disabled
1: Enabled: Scan mode enabled

AWDSGL

Bit 9: Enable the watchdog on a single channel in scan mode.

Allowed values:
0: AllChannels: Analog watchdog enabled on all channels
1: SingleChannel: Analog watchdog enabled on a single channel

JAUTO

Bit 10: Automatic injected group conversion.

Allowed values:
0: Disabled: Automatic injected group conversion disabled
1: Enabled: Automatic injected group conversion enabled

DISCEN

Bit 11: Discontinuous mode on regular channels.

Allowed values:
0: Disabled: Discontinuous mode on regular channels disabled
1: Enabled: Discontinuous mode on regular channels enabled

JDISCEN

Bit 12: Discontinuous mode on injected channels.

Allowed values:
0: Disabled: Discontinuous mode on injected channels disabled
1: Enabled: Discontinuous mode on injected channels enabled

DISCNUM

Bits 13-15: Discontinuous mode channel count.

Allowed values: 0-7

JAWDEN

Bit 22: Analog watchdog enable on injected channels.

Allowed values:
0: Disabled: Analog watchdog disabled on injected channels
1: Enabled: Analog watchdog enabled on injected channels

AWDEN

Bit 23: Analog watchdog enable on regular channels.

Allowed values:
0: Disabled: Analog watchdog disabled on regular channels
1: Enabled: Analog watchdog enabled on regular channels

RES

Bits 24-25: Resolution.

Allowed values:
0: TwelveBit: 12-bit (15 ADCCLK cycles)
1: TenBit: 10-bit (13 ADCCLK cycles)
2: EightBit: 8-bit (11 ADCCLK cycles)
3: SixBit: 6-bit (9 ADCCLK cycles)

OVRIE

Bit 26: Overrun interrupt enable.

Allowed values:
0: Disabled: Overrun interrupt disabled
1: Enabled: Overrun interrupt enabled

CR2

control register 2

Offset: 0x8, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SWSTART
rw 		EXTEN
rw 		EXTSEL
rw 		JSWSTART
rw 		JEXTEN
rw 		JEXTSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ALIGN
rw 		EOCS
rw 		DDS
rw 		DMA
rw 		CONT
rw 		ADON
rw
Toggle Fields.

ADON

Bit 0: A/D Converter ON / OFF.

Allowed values:
0: Disabled: Disable ADC conversion and go to power down mode
1: Enabled: Enable ADC

CONT

Bit 1: Continuous conversion.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

DMA

Bit 8: Direct memory access mode (for single ADC mode).

Allowed values:
0: Disabled: DMA mode disabled
1: Enabled: DMA mode enabled

DDS

Bit 9: DMA disable selection (for single ADC mode).

Allowed values:
0: Single: No new DMA request is issued after the last transfer
1: Continuous: DMA requests are issued as long as data are converted and DMA=1

EOCS

Bit 10: End of conversion selection.

Allowed values:
0: EachSequence: The EOC bit is set at the end of each sequence of regular conversions
1: EachConversion: The EOC bit is set at the end of each regular conversion

ALIGN

Bit 11: Data alignment.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

JEXTSEL

Bits 16-19: External event select for injected group.

Allowed values:
0: TIM1TRGO: Timer 1 TRGO event
1: TIM1CC4: Timer 1 CC4 event
2: TIM2TRGO: Timer 2 TRGO event
3: TIM2CC1: Timer 2 CC1 event
4: TIM3CC4: Timer 3 CC4 event
5: TIM4TRGO: Timer 4 TRGO event
7: TIM8CC4: Timer 8 CC4 event
8: TIM1TRGO2: Timer 1 TRGO(2) event
9: TIM8TRGO: Timer 8 TRGO event
10: TIM8TRGO2: Timer 8 TRGO(2) event
11: TIM3CC3: Timer 3 CC3 event
12: TIM5TRGO: Timer 5 TRGO event
13: TIM3CC1: Timer 3 CC1 event
14: TIM6TRGO: Timer 6 TRGO event

JEXTEN

Bits 20-21: External trigger enable for injected channels.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

JSWSTART

Bit 22: Start conversion of injected channels.

Allowed values:
1: Start: Starts conversion of injected channels

EXTSEL

Bits 24-27: External event select for regular group.

Allowed values:
0: TIM1CC1: Timer 1 CC1 event
1: TIM1CC2: Timer 1 CC2 event
2: TIM1CC3: Timer 1 CC3 event
3: TIM2CC2: Timer 2 CC2 event
4: TIM2CC3: Timer 2 CC3 event
5: TIM2CC4: Timer 2 CC4 event
6: TIM2TRGO: Timer 2 TRGO event

EXTEN

Bits 28-29: External trigger enable for regular channels.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

SWSTART

Bit 30: Start conversion of regular channels.

Allowed values:
1: Start: Starts conversion of regular channels

SMPR1

sample time register 1

Offset: 0xC, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SMPx_x
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMPx_x
rw
Toggle Fields.

SMPx_x

Bits 0-31: Sample time bits.

Allowed values:
0: Cycles3: 3 cycles
1: Cycles15: 15 cycles
2: Cycles28: 28 cycles
3: Cycles56: 56 cycles
4: Cycles84: 84 cycles
5: Cycles112: 112 cycles
6: Cycles144: 144 cycles
7: Cycles480: 480 cycles

SMPR2

sample time register 2

Offset: 0x10, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SMPx_x
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMPx_x
rw
Toggle Fields.

SMPx_x

Bits 0-31: Sample time bits.

Allowed values:
0: Cycles3: 3 cycles
1: Cycles15: 15 cycles
2: Cycles28: 28 cycles
3: Cycles56: 56 cycles
4: Cycles84: 84 cycles
5: Cycles112: 112 cycles
6: Cycles144: 144 cycles
7: Cycles480: 480 cycles

JOFR%s

injected channel data offset register x

Offset: 0x14, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
JOFFSET
rw
Toggle Fields.

JOFFSET

Bits 0-11: Data offset for injected channel x.

Allowed values: 0-4095

HTR

watchdog higher threshold register

Offset: 0x24, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HT
rw
Toggle Fields.

HT

Bits 0-11: Analog watchdog higher threshold.

Allowed values: 0-4095

LTR

watchdog lower threshold register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LT
rw
Toggle Fields.

LT

Bits 0-11: Analog watchdog lower threshold.

Allowed values: 0-4095

SQR1

regular sequence register 1

Offset: 0x2C, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
L
rw 		SQ16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SQ16
rw 		SQ15
rw 		SQ14
rw 		SQ13
rw
Toggle Fields.

SQ13

Bits 0-4: 13th conversion in regular sequence.

Allowed values: 0-18

SQ14

Bits 5-9: 14th conversion in regular sequence.

Allowed values: 0-18

SQ15

Bits 10-14: 15th conversion in regular sequence.

Allowed values: 0-18

SQ16

Bits 15-19: 16th conversion in regular sequence.

Allowed values: 0-18

L

Bits 20-23: Regular channel sequence length.

Allowed values: 0-15

SQR2

regular sequence register 2

Offset: 0x30, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SQ12
rw 		SQ11
rw 		SQ10
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SQ10
rw 		SQ9
rw 		SQ8
rw 		SQ7
rw
Toggle Fields.

SQ7

Bits 0-4: 7th conversion in regular sequence.

Allowed values: 0-18

SQ8

Bits 5-9: 8th conversion in regular sequence.

Allowed values: 0-18

SQ9

Bits 10-14: 9th conversion in regular sequence.

Allowed values: 0-18

SQ10

Bits 15-19: 10th conversion in regular sequence.

Allowed values: 0-18

SQ11

Bits 20-24: 11th conversion in regular sequence.

Allowed values: 0-18

SQ12

Bits 25-29: 12th conversion in regular sequence.

Allowed values: 0-18

SQR3

regular sequence register 3

Offset: 0x34, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SQ6
rw 		SQ5
rw 		SQ4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SQ4
rw 		SQ3
rw 		SQ2
rw 		SQ1
rw
Toggle Fields.

SQ1

Bits 0-4: 1st conversion in regular sequence.

Allowed values: 0-18

SQ2

Bits 5-9: 2nd conversion in regular sequence.

Allowed values: 0-18

SQ3

Bits 10-14: 3rd conversion in regular sequence.

Allowed values: 0-18

SQ4

Bits 15-19: 4th conversion in regular sequence.

Allowed values: 0-18

SQ5

Bits 20-24: 5th conversion in regular sequence.

Allowed values: 0-18

SQ6

Bits 25-29: 6th conversion in regular sequence.

Allowed values: 0-18

JSQR

injected sequence register

Offset: 0x38, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
JL
rw 		JSQ4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
JSQ4
rw 		JSQ3
rw 		JSQ2
rw 		JSQ1
rw
Toggle Fields.

JSQ1

Bits 0-4: 1st conversion in injected sequence.

Allowed values: 0-18

JSQ2

Bits 5-9: 2nd conversion in injected sequence.

Allowed values: 0-18

JSQ3

Bits 10-14: 3rd conversion in injected sequence.

Allowed values: 0-18

JSQ4

Bits 15-19: 4th conversion in injected sequence.

Allowed values: 0-18

JL

Bits 20-21: Injected sequence length.

Allowed values: 0-3

JDR%s

injected data register x

Offset: 0x3C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
JDATA
r
Toggle Fields.

JDATA

Bits 0-15: Injected data.

DR

regular data register

Offset: 0x4C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
r
Toggle Fields.

DATA

Bits 0-15: Regular data.

ADC_Common

0x40012300: ADC common registers

3/3 fields covered. Toggle Registers.

CCR

ADC common control register

Offset: 0x4, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TSVREFE
rw 		VBATE
rw 		ADCPRE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

ADCPRE

Bits 16-17: ADC prescaler.

Allowed values:
0: Div2: PCLK2 divided by 2
1: Div4: PCLK2 divided by 4
2: Div6: PCLK2 divided by 6
3: Div8: PCLK2 divided by 8

VBATE

Bit 22: VBAT enable.

Allowed values:
0: Disabled: V_BAT channel disabled
1: Enabled: V_BAT channel enabled

TSVREFE

Bit 23: Temperature sensor and VREFINT enable.

Allowed values:
0: Disabled: Temperature sensor and V_REFINT channel disabled
1: Enabled: Temperature sensor and V_REFINT channel enabled

CRC

0x40023000: Cryptographic processor

3/3 fields covered. Toggle Registers.

DR

Data register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-31: Data Register.

Allowed values: 0-4294967295

IDR

Independent Data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR
rw
Toggle Fields.

IDR

Bits 0-7: Independent Data register.

Allowed values: 0-255

CR

Control register

Offset: 0x8, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESET
w
Toggle Fields.

RESET

Bit 0: Control regidter.

Allowed values:
1: Reset: Resets the CRC calculation unit and sets the data register to 0xFFFF FFFF

DBGMCU

0xE0042000: Debug support

2/21 fields covered. Toggle Registers.

IDCODE

IDCODE

Offset: 0x0, reset: 0x10006411, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
REV_ID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEV_ID
r
Toggle Fields.

DEV_ID

Bits 0-11: DEV_ID.

REV_ID

Bits 16-31: REV_ID.

CR

Control Register

Offset: 0x4, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRACE_MODE
rw 		TRACE_IOEN
rw 		DBG_STANDBY
rw 		DBG_STOP
rw 		DBG_SLEEP
rw
Toggle Fields.

DBG_SLEEP

Bit 0: DBG_SLEEP.

DBG_STOP

Bit 1: DBG_STOP.

DBG_STANDBY

Bit 2: DBG_STANDBY.

TRACE_IOEN

Bit 5: TRACE_IOEN.

TRACE_MODE

Bits 6-7: TRACE_MODE.

APB1_FZ

Debug MCU APB1 Freeze registe

Offset: 0x8, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBG_I2C3SMBUS_TIMEOUT
rw 		DBG_I2C2_SMBUS_TIMEOUT
rw 		DBG_I2C1_SMBUS_TIMEOUT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBG_IWDG_STOP
rw 		DBG_WWDG_STOP
rw 		DBG_RTC_Stop
rw 		DBG_TIM5_STOP
rw 		DBG_TIM4_STOP
rw 		DBG_TIM3_STOP
rw 		DBG_TIM2_STOP
rw
Toggle Fields.

DBG_TIM2_STOP

Bit 0: DBG_TIM2_STOP.

DBG_TIM3_STOP

Bit 1: DBG_TIM3 _STOP.

DBG_TIM4_STOP

Bit 2: DBG_TIM4_STOP.

DBG_TIM5_STOP

Bit 3: DBG_TIM5_STOP.

DBG_RTC_Stop

Bit 10: RTC stopped when Core is halted.

DBG_WWDG_STOP

Bit 11: DBG_WWDG_STOP.

DBG_IWDG_STOP

Bit 12: DBG_IWDEG_STOP.

DBG_I2C1_SMBUS_TIMEOUT

Bit 21: DBG_J2C1_SMBUS_TIMEOUT.

DBG_I2C2_SMBUS_TIMEOUT

Bit 22: DBG_J2C2_SMBUS_TIMEOUT.

DBG_I2C3SMBUS_TIMEOUT

Bit 23: DBG_J2C3SMBUS_TIMEOUT.

APB2_FZ

Debug MCU APB2 Freeze registe

Offset: 0xC, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBG_TIM11_STOP
rw 		DBG_TIM10_STOP
rw 		DBG_TIM9_STOP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBG_TIM1_STOP
rw
Toggle Fields.

DBG_TIM1_STOP

Bit 0: TIM1 counter stopped when core is halted.

DBG_TIM9_STOP

Bit 16: TIM9 counter stopped when core is halted.

DBG_TIM10_STOP

Bit 17: TIM10 counter stopped when core is halted.

DBG_TIM11_STOP

Bit 18: TIM11 counter stopped when core is halted.

DMA1

0x40026000: DMA controller

107/107 fields covered. Toggle Registers.

CR

stream x configuration register

Offset: 0x0, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHSEL
rw 		MBURST
rw 		PBURST
rw 		CT
rw 		DBM
rw 		PL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PINCOS
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		PFCTRL
rw 		TCIE
rw 		HTIE
rw 		TEIE
rw 		DMEIE
rw 		EN
rw
Toggle Fields.

EN

Bit 0: Stream enable / flag stream ready when read low.

Allowed values:
0: Disabled: Stream disabled
1: Enabled: Stream enabled

DMEIE

Bit 1: Direct mode error interrupt enable.

Allowed values:
0: Disabled: DME interrupt disabled
1: Enabled: DME interrupt enabled

TEIE

Bit 2: Transfer error interrupt enable.

Allowed values:
0: Disabled: TE interrupt disabled
1: Enabled: TE interrupt enabled

HTIE

Bit 3: Half transfer interrupt enable.

Allowed values:
0: Disabled: HT interrupt disabled
1: Enabled: HT interrupt enabled

TCIE

Bit 4: Transfer complete interrupt enable.

Allowed values:
0: Disabled: TC interrupt disabled
1: Enabled: TC interrupt enabled

PFCTRL

Bit 5: Peripheral flow controller.

Allowed values:
0: DMA: The DMA is the flow controller
1: Peripheral: The peripheral is the flow controller

DIR

Bits 6-7: Data transfer direction.

Allowed values:
0: PeripheralToMemory: Peripheral-to-memory
1: MemoryToPeripheral: Memory-to-peripheral
2: MemoryToMemory: Memory-to-memory

CIRC

Bit 8: Circular mode.

Allowed values:
0: Disabled: Circular mode disabled
1: Enabled: Circular mode enabled

PINC

Bit 9: Peripheral increment mode.

Allowed values:
0: Fixed: Address pointer is fixed
1: Incremented: Address pointer is incremented after each data transfer

MINC

Bit 10: Memory increment mode.

Allowed values:
0: Fixed: Address pointer is fixed
1: Incremented: Address pointer is incremented after each data transfer

PSIZE

Bits 11-12: Peripheral data size.

Allowed values:
0: Bits8: Byte (8-bit)
1: Bits16: Half-word (16-bit)
2: Bits32: Word (32-bit)

MSIZE

Bits 13-14: Memory data size.

Allowed values:
0: Bits8: Byte (8-bit)
1: Bits16: Half-word (16-bit)
2: Bits32: Word (32-bit)

PINCOS

Bit 15: Peripheral increment offset size.

Allowed values:
0: PSIZE: The offset size for the peripheral address calculation is linked to the PSIZE
1: Fixed4: The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)

PL

Bits 16-17: Priority level.

Allowed values:
0: Low: Low
1: Medium: Medium
2: High: High
3: VeryHigh: Very high

DBM

Bit 18: Double buffer mode.

Allowed values:
0: Disabled: No buffer switching at the end of transfer
1: Enabled: Memory target switched at the end of the DMA transfer

CT

Bit 19: Current target (only in double buffer mode).

Allowed values:
0: Memory0: The current target memory is Memory 0
1: Memory1: The current target memory is Memory 1

PBURST

Bits 21-22: Peripheral burst transfer configuration.

Allowed values:
0: Single: Single transfer
1: INCR4: Incremental burst of 4 beats
2: INCR8: Incremental burst of 8 beats
3: INCR16: Incremental burst of 16 beats

MBURST

Bits 23-24: Memory burst transfer configuration.

Allowed values:
0: Single: Single transfer
1: INCR4: Incremental burst of 4 beats
2: INCR8: Incremental burst of 8 beats
3: INCR16: Incremental burst of 16 beats

CHSEL

Bits 25-27: Channel selection.

Allowed values: 0-7

NDTR

stream x number of data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields.

NDT

Bits 0-15: Number of data items to transfer.

Allowed values: 0-65535

PAR

stream x peripheral address register

Offset: 0x8, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields.

PA

Bits 0-31: Peripheral address.

Allowed values: 0-4294967295

M0AR

stream x memory 0 address register

Offset: 0xC, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
M0A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M0A
rw
Toggle Fields.

M0A

Bits 0-31: Memory 0 address.

Allowed values: 0-4294967295

M1AR

stream x memory 1 address register

Offset: 0x10, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
M1A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M1A
rw
Toggle Fields.

M1A

Bits 0-31: Memory 1 address (used in case of Double buffer mode).

Allowed values: 0-4294967295

FCR

stream x FIFO control register

Offset: 0x14, reset: 0x00000021, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FEIE
rw 		FS
r 		DMDIS
rw 		FTH
rw
Toggle Fields.

FTH

Bits 0-1: FIFO threshold selection.

Allowed values:
0: Quarter: 1/4 full FIFO
1: Half: 1/2 full FIFO
2: ThreeQuarters: 3/4 full FIFO
3: Full: Full FIFO

DMDIS

Bit 2: Direct mode disable.

Allowed values:
0: Enabled: Direct mode is enabled
1: Disabled: Direct mode is disabled

FS

Bits 3-5: FIFO status.

Allowed values:
0: Quarter1: 0 < fifo_level < 1/4
1: Quarter2: 1/4 <= fifo_level < 1/2
2: Quarter3: 1/2 <= fifo_level < 3/4
3: Quarter4: 3/4 <= fifo_level < full
4: Empty: FIFO is empty
5: Full: FIFO is full

FEIE

Bit 7: FIFO error interrupt enable.

Allowed values:
0: Disabled: FE interrupt disabled
1: Enabled: FE interrupt enabled

DMA2

0x40026400: DMA controller

107/107 fields covered. Toggle Registers.

CR

stream x configuration register

Offset: 0x0, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHSEL
rw 		MBURST
rw 		PBURST
rw 		CT
rw 		DBM
rw 		PL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PINCOS
rw 		MSIZE
rw 		PSIZE
rw 		MINC
rw 		PINC
rw 		CIRC
rw 		DIR
rw 		PFCTRL
rw 		TCIE
rw 		HTIE
rw 		TEIE
rw 		DMEIE
rw 		EN
rw
Toggle Fields.

EN

Bit 0: Stream enable / flag stream ready when read low.

Allowed values:
0: Disabled: Stream disabled
1: Enabled: Stream enabled

DMEIE

Bit 1: Direct mode error interrupt enable.

Allowed values:
0: Disabled: DME interrupt disabled
1: Enabled: DME interrupt enabled

TEIE

Bit 2: Transfer error interrupt enable.

Allowed values:
0: Disabled: TE interrupt disabled
1: Enabled: TE interrupt enabled

HTIE

Bit 3: Half transfer interrupt enable.

Allowed values:
0: Disabled: HT interrupt disabled
1: Enabled: HT interrupt enabled

TCIE

Bit 4: Transfer complete interrupt enable.

Allowed values:
0: Disabled: TC interrupt disabled
1: Enabled: TC interrupt enabled

PFCTRL

Bit 5: Peripheral flow controller.

Allowed values:
0: DMA: The DMA is the flow controller
1: Peripheral: The peripheral is the flow controller

DIR

Bits 6-7: Data transfer direction.

Allowed values:
0: PeripheralToMemory: Peripheral-to-memory
1: MemoryToPeripheral: Memory-to-peripheral
2: MemoryToMemory: Memory-to-memory

CIRC

Bit 8: Circular mode.

Allowed values:
0: Disabled: Circular mode disabled
1: Enabled: Circular mode enabled

PINC

Bit 9: Peripheral increment mode.

Allowed values:
0: Fixed: Address pointer is fixed
1: Incremented: Address pointer is incremented after each data transfer

MINC

Bit 10: Memory increment mode.

Allowed values:
0: Fixed: Address pointer is fixed
1: Incremented: Address pointer is incremented after each data transfer

PSIZE

Bits 11-12: Peripheral data size.

Allowed values:
0: Bits8: Byte (8-bit)
1: Bits16: Half-word (16-bit)
2: Bits32: Word (32-bit)

MSIZE

Bits 13-14: Memory data size.

Allowed values:
0: Bits8: Byte (8-bit)
1: Bits16: Half-word (16-bit)
2: Bits32: Word (32-bit)

PINCOS

Bit 15: Peripheral increment offset size.

Allowed values:
0: PSIZE: The offset size for the peripheral address calculation is linked to the PSIZE
1: Fixed4: The offset size for the peripheral address calculation is fixed to 4 (32-bit alignment)

PL

Bits 16-17: Priority level.

Allowed values:
0: Low: Low
1: Medium: Medium
2: High: High
3: VeryHigh: Very high

DBM

Bit 18: Double buffer mode.

Allowed values:
0: Disabled: No buffer switching at the end of transfer
1: Enabled: Memory target switched at the end of the DMA transfer

CT

Bit 19: Current target (only in double buffer mode).

Allowed values:
0: Memory0: The current target memory is Memory 0
1: Memory1: The current target memory is Memory 1

PBURST

Bits 21-22: Peripheral burst transfer configuration.

Allowed values:
0: Single: Single transfer
1: INCR4: Incremental burst of 4 beats
2: INCR8: Incremental burst of 8 beats
3: INCR16: Incremental burst of 16 beats

MBURST

Bits 23-24: Memory burst transfer configuration.

Allowed values:
0: Single: Single transfer
1: INCR4: Incremental burst of 4 beats
2: INCR8: Incremental burst of 8 beats
3: INCR16: Incremental burst of 16 beats

CHSEL

Bits 25-27: Channel selection.

Allowed values: 0-7

NDTR

stream x number of data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NDT
rw
Toggle Fields.

NDT

Bits 0-15: Number of data items to transfer.

Allowed values: 0-65535

PAR

stream x peripheral address register

Offset: 0x8, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PA
rw
Toggle Fields.

PA

Bits 0-31: Peripheral address.

Allowed values: 0-4294967295

M0AR

stream x memory 0 address register

Offset: 0xC, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
M0A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M0A
rw
Toggle Fields.

M0A

Bits 0-31: Memory 0 address.

Allowed values: 0-4294967295

M1AR

stream x memory 1 address register

Offset: 0x10, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
M1A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M1A
rw
Toggle Fields.

M1A

Bits 0-31: Memory 1 address (used in case of Double buffer mode).

Allowed values: 0-4294967295

FCR

stream x FIFO control register

Offset: 0x14, reset: 0x00000021, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FEIE
rw 		FS
r 		DMDIS
rw 		FTH
rw
Toggle Fields.

FTH

Bits 0-1: FIFO threshold selection.

Allowed values:
0: Quarter: 1/4 full FIFO
1: Half: 1/2 full FIFO
2: ThreeQuarters: 3/4 full FIFO
3: Full: Full FIFO

DMDIS

Bit 2: Direct mode disable.

Allowed values:
0: Enabled: Direct mode is enabled
1: Disabled: Direct mode is disabled

FS

Bits 3-5: FIFO status.

Allowed values:
0: Quarter1: 0 < fifo_level < 1/4
1: Quarter2: 1/4 <= fifo_level < 1/2
2: Quarter3: 1/2 <= fifo_level < 3/4
3: Quarter4: 3/4 <= fifo_level < full
4: Empty: FIFO is empty
5: Full: FIFO is full

FEIE

Bit 7: FIFO error interrupt enable.

Allowed values:
0: Disabled: FE interrupt disabled
1: Enabled: FE interrupt enabled

EXTI

0x40013C00: External interrupt/event controller

138/138 fields covered. Toggle Registers.

IMR

Interrupt mask register (EXTI_IMR)

Offset: 0x0, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MR22
rw 		MR21
rw 		MR20
rw 		MR19
rw 		MR18
rw 		MR17
rw 		MR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MR15
rw 		MR14
rw 		MR13
rw 		MR12
rw 		MR11
rw 		MR10
rw 		MR9
rw 		MR8
rw 		MR7
rw 		MR6
rw 		MR5
rw 		MR4
rw 		MR3
rw 		MR2
rw 		MR1
rw 		MR0
rw
Toggle Fields.

MR0

Bit 0: Interrupt Mask on line 0.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR1

Bit 1: Interrupt Mask on line 1.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR2

Bit 2: Interrupt Mask on line 2.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR3

Bit 3: Interrupt Mask on line 3.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR4

Bit 4: Interrupt Mask on line 4.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR5

Bit 5: Interrupt Mask on line 5.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR6

Bit 6: Interrupt Mask on line 6.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR7

Bit 7: Interrupt Mask on line 7.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR8

Bit 8: Interrupt Mask on line 8.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR9

Bit 9: Interrupt Mask on line 9.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR10

Bit 10: Interrupt Mask on line 10.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR11

Bit 11: Interrupt Mask on line 11.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR12

Bit 12: Interrupt Mask on line 12.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR13

Bit 13: Interrupt Mask on line 13.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR14

Bit 14: Interrupt Mask on line 14.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR15

Bit 15: Interrupt Mask on line 15.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR16

Bit 16: Interrupt Mask on line 16.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR17

Bit 17: Interrupt Mask on line 17.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR18

Bit 18: Interrupt Mask on line 18.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR19

Bit 19: Interrupt Mask on line 19.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR20

Bit 20: Interrupt Mask on line 20.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR21

Bit 21: Interrupt Mask on line 21.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR22

Bit 22: Interrupt Mask on line 22.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EMR

Event mask register (EXTI_EMR)

Offset: 0x4, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MR22
rw 		MR21
rw 		MR20
rw 		MR19
rw 		MR18
rw 		MR17
rw 		MR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MR15
rw 		MR14
rw 		MR13
rw 		MR12
rw 		MR11
rw 		MR10
rw 		MR9
rw 		MR8
rw 		MR7
rw 		MR6
rw 		MR5
rw 		MR4
rw 		MR3
rw 		MR2
rw 		MR1
rw 		MR0
rw
Toggle Fields.

MR0

Bit 0: Event Mask on line 0.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR1

Bit 1: Event Mask on line 1.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR2

Bit 2: Event Mask on line 2.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR3

Bit 3: Event Mask on line 3.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR4

Bit 4: Event Mask on line 4.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR5

Bit 5: Event Mask on line 5.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR6

Bit 6: Event Mask on line 6.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR7

Bit 7: Event Mask on line 7.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR8

Bit 8: Event Mask on line 8.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR9

Bit 9: Event Mask on line 9.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR10

Bit 10: Event Mask on line 10.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR11

Bit 11: Event Mask on line 11.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR12

Bit 12: Event Mask on line 12.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR13

Bit 13: Event Mask on line 13.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR14

Bit 14: Event Mask on line 14.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR15

Bit 15: Event Mask on line 15.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR16

Bit 16: Event Mask on line 16.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR17

Bit 17: Event Mask on line 17.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR18

Bit 18: Event Mask on line 18.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR19

Bit 19: Event Mask on line 19.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR20

Bit 20: Event Mask on line 20.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR21

Bit 21: Event Mask on line 21.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR22

Bit 22: Event Mask on line 22.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

RTSR

Rising Trigger selection register (EXTI_RTSR)

Offset: 0x8, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TR22
rw 		TR21
rw 		TR20
rw 		TR19
rw 		TR18
rw 		TR17
rw 		TR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TR15
rw 		TR14
rw 		TR13
rw 		TR12
rw 		TR11
rw 		TR10
rw 		TR9
rw 		TR8
rw 		TR7
rw 		TR6
rw 		TR5
rw 		TR4
rw 		TR3
rw 		TR2
rw 		TR1
rw 		TR0
rw
Toggle Fields.

TR0

Bit 0: Rising trigger event configuration of line 0.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR1

Bit 1: Rising trigger event configuration of line 1.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR2

Bit 2: Rising trigger event configuration of line 2.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR3

Bit 3: Rising trigger event configuration of line 3.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR4

Bit 4: Rising trigger event configuration of line 4.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR5

Bit 5: Rising trigger event configuration of line 5.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR6

Bit 6: Rising trigger event configuration of line 6.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR7

Bit 7: Rising trigger event configuration of line 7.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR8

Bit 8: Rising trigger event configuration of line 8.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR9

Bit 9: Rising trigger event configuration of line 9.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR10

Bit 10: Rising trigger event configuration of line 10.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR11

Bit 11: Rising trigger event configuration of line 11.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR12

Bit 12: Rising trigger event configuration of line 12.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR13

Bit 13: Rising trigger event configuration of line 13.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR14

Bit 14: Rising trigger event configuration of line 14.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR15

Bit 15: Rising trigger event configuration of line 15.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR16

Bit 16: Rising trigger event configuration of line 16.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR17

Bit 17: Rising trigger event configuration of line 17.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR18

Bit 18: Rising trigger event configuration of line 18.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR19

Bit 19: Rising trigger event configuration of line 19.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR20

Bit 20: Rising trigger event configuration of line 20.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR21

Bit 21: Rising trigger event configuration of line 21.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR22

Bit 22: Rising trigger event configuration of line 22.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTSR

Falling Trigger selection register (EXTI_FTSR)

Offset: 0xC, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TR22
rw 		TR21
rw 		TR20
rw 		TR19
rw 		TR18
rw 		TR17
rw 		TR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TR15
rw 		TR14
rw 		TR13
rw 		TR12
rw 		TR11
rw 		TR10
rw 		TR9
rw 		TR8
rw 		TR7
rw 		TR6
rw 		TR5
rw 		TR4
rw 		TR3
rw 		TR2
rw 		TR1
rw 		TR0
rw
Toggle Fields.

TR0

Bit 0: Falling trigger event configuration of line 0.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR1

Bit 1: Falling trigger event configuration of line 1.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR2

Bit 2: Falling trigger event configuration of line 2.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR3

Bit 3: Falling trigger event configuration of line 3.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR4

Bit 4: Falling trigger event configuration of line 4.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR5

Bit 5: Falling trigger event configuration of line 5.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR6

Bit 6: Falling trigger event configuration of line 6.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR7

Bit 7: Falling trigger event configuration of line 7.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR8

Bit 8: Falling trigger event configuration of line 8.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR9

Bit 9: Falling trigger event configuration of line 9.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR10

Bit 10: Falling trigger event configuration of line 10.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR11

Bit 11: Falling trigger event configuration of line 11.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR12

Bit 12: Falling trigger event configuration of line 12.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR13

Bit 13: Falling trigger event configuration of line 13.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR14

Bit 14: Falling trigger event configuration of line 14.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR15

Bit 15: Falling trigger event configuration of line 15.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR16

Bit 16: Falling trigger event configuration of line 16.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR17

Bit 17: Falling trigger event configuration of line 17.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR18

Bit 18: Falling trigger event configuration of line 18.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR19

Bit 19: Falling trigger event configuration of line 19.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR20

Bit 20: Falling trigger event configuration of line 20.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR21

Bit 21: Falling trigger event configuration of line 21.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR22

Bit 22: Falling trigger event configuration of line 22.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIER

Software interrupt event register (EXTI_SWIER)

Offset: 0x10, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SWIER22
rw 		SWIER21
rw 		SWIER20
rw 		SWIER19
rw 		SWIER18
rw 		SWIER17
rw 		SWIER16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWIER15
rw 		SWIER14
rw 		SWIER13
rw 		SWIER12
rw 		SWIER11
rw 		SWIER10
rw 		SWIER9
rw 		SWIER8
rw 		SWIER7
rw 		SWIER6
rw 		SWIER5
rw 		SWIER4
rw 		SWIER3
rw 		SWIER2
rw 		SWIER1
rw 		SWIER0
rw
Toggle Fields.

SWIER0

Bit 0: Software Interrupt on line 0.

Allowed values:
1: Pend: Generates an interrupt request

SWIER1

Bit 1: Software Interrupt on line 1.

Allowed values:
1: Pend: Generates an interrupt request

SWIER2

Bit 2: Software Interrupt on line 2.

Allowed values:
1: Pend: Generates an interrupt request

SWIER3

Bit 3: Software Interrupt on line 3.

Allowed values:
1: Pend: Generates an interrupt request

SWIER4

Bit 4: Software Interrupt on line 4.

Allowed values:
1: Pend: Generates an interrupt request

SWIER5

Bit 5: Software Interrupt on line 5.

Allowed values:
1: Pend: Generates an interrupt request

SWIER6

Bit 6: Software Interrupt on line 6.

Allowed values:
1: Pend: Generates an interrupt request

SWIER7

Bit 7: Software Interrupt on line 7.

Allowed values:
1: Pend: Generates an interrupt request

SWIER8

Bit 8: Software Interrupt on line 8.

Allowed values:
1: Pend: Generates an interrupt request

SWIER9

Bit 9: Software Interrupt on line 9.

Allowed values:
1: Pend: Generates an interrupt request

SWIER10

Bit 10: Software Interrupt on line 10.

Allowed values:
1: Pend: Generates an interrupt request

SWIER11

Bit 11: Software Interrupt on line 11.

Allowed values:
1: Pend: Generates an interrupt request

SWIER12

Bit 12: Software Interrupt on line 12.

Allowed values:
1: Pend: Generates an interrupt request

SWIER13

Bit 13: Software Interrupt on line 13.

Allowed values:
1: Pend: Generates an interrupt request

SWIER14

Bit 14: Software Interrupt on line 14.

Allowed values:
1: Pend: Generates an interrupt request

SWIER15

Bit 15: Software Interrupt on line 15.

Allowed values:
1: Pend: Generates an interrupt request

SWIER16

Bit 16: Software Interrupt on line 16.

Allowed values:
1: Pend: Generates an interrupt request

SWIER17

Bit 17: Software Interrupt on line 17.

Allowed values:
1: Pend: Generates an interrupt request

SWIER18

Bit 18: Software Interrupt on line 18.

Allowed values:
1: Pend: Generates an interrupt request

SWIER19

Bit 19: Software Interrupt on line 19.

Allowed values:
1: Pend: Generates an interrupt request

SWIER20

Bit 20: Software Interrupt on line 20.

Allowed values:
1: Pend: Generates an interrupt request

SWIER21

Bit 21: Software Interrupt on line 21.

Allowed values:
1: Pend: Generates an interrupt request

SWIER22

Bit 22: Software Interrupt on line 22.

Allowed values:
1: Pend: Generates an interrupt request

PR

Pending register (EXTI_PR)

Offset: 0x14, reset: 0x00000000, access: read-write

23/23 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PR22
rw 		PR21
rw 		PR20
rw 		PR19
rw 		PR18
rw 		PR17
rw 		PR16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PR15
rw 		PR14
rw 		PR13
rw 		PR12
rw 		PR11
rw 		PR10
rw 		PR9
rw 		PR8
rw 		PR7
rw 		PR6
rw 		PR5
rw 		PR4
rw 		PR3
rw 		PR2
rw 		PR1
rw 		PR0
rw
Toggle Fields.

PR0

Bit 0: Pending bit 0.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR1

Bit 1: Pending bit 1.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR2

Bit 2: Pending bit 2.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR3

Bit 3: Pending bit 3.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR4

Bit 4: Pending bit 4.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR5

Bit 5: Pending bit 5.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR6

Bit 6: Pending bit 6.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR7

Bit 7: Pending bit 7.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR8

Bit 8: Pending bit 8.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR9

Bit 9: Pending bit 9.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR10

Bit 10: Pending bit 10.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR11

Bit 11: Pending bit 11.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR12

Bit 12: Pending bit 12.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR13

Bit 13: Pending bit 13.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR14

Bit 14: Pending bit 14.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR15

Bit 15: Pending bit 15.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR16

Bit 16: Pending bit 16.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR17

Bit 17: Pending bit 17.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR18

Bit 18: Pending bit 18.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR19

Bit 19: Pending bit 19.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR20

Bit 20: Pending bit 20.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR21

Bit 21: Pending bit 21.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR22

Bit 22: Pending bit 22.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FLASH

0x40023C00: FLASH

18/32 fields covered. Toggle Registers.

ACR

Flash access control register

Offset: 0x0, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DCRST
rw 		ICRST
w 		DCEN
rw 		ICEN
rw 		PRFTEN
rw 		LATENCY
rw
Toggle Fields.

LATENCY

Bits 0-2: Latency.

Allowed values:
0: WS0: 0 wait states
1: WS1: 1 wait states
2: WS2: 2 wait states
3: WS3: 3 wait states
4: WS4: 4 wait states
5: WS5: 5 wait states
6: WS6: 6 wait states
7: WS7: 7 wait states
8: WS8: 8 wait states
9: WS9: 9 wait states
10: WS10: 10 wait states
11: WS11: 11 wait states
12: WS12: 12 wait states
13: WS13: 13 wait states
14: WS14: 14 wait states
15: WS15: 15 wait states

PRFTEN

Bit 8: Prefetch enable.

Allowed values:
0: Disabled: Prefetch is disabled
1: Enabled: Prefetch is enabled

ICEN

Bit 9: Instruction cache enable.

Allowed values:
0: Disabled: Instruction cache is disabled
1: Enabled: Instruction cache is enabled

DCEN

Bit 10: Data cache enable.

Allowed values:
0: Disabled: Data cache is disabled
1: Enabled: Data cache is enabled

ICRST

Bit 11: Instruction cache reset.

Allowed values:
0: NotReset: Instruction cache is not reset
1: Reset: Instruction cache is reset

DCRST

Bit 12: Data cache reset.

Allowed values:
0: NotReset: Data cache is not reset
1: Reset: Data cache is reset

KEYR

Flash key register

Offset: 0x4, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
KEY
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields.

KEY

Bits 0-31: FPEC key.

Allowed values: 0-4294967295

OPTKEYR

Flash option key register

Offset: 0x8, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OPTKEY
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OPTKEY
w
Toggle Fields.

OPTKEY

Bits 0-31: Option byte key.

Allowed values: 0-4294967295

SR

Status register

Offset: 0xC, reset: 0x00000000, access: Unspecified

1/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PGSERR
rw 		PGPERR
rw 		PGAERR
rw 		WRPERR
rw 		OPERR
rw 		EOP
rw
Toggle Fields.

EOP

Bit 0: End of operation.

OPERR

Bit 1: Operation error.

WRPERR

Bit 4: Write protection error.

PGAERR

Bit 5: Programming alignment error.

PGPERR

Bit 6: Programming parallelism error.

PGSERR

Bit 7: Programming sequence error.

BSY

Bit 16: Busy.

CR

Control register

Offset: 0x10, reset: 0x80000000, access: read-write

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LOCK
rw 		ERRIE
rw 		EOPIE
rw 		STRT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSIZE
rw 		SNB
rw 		MER
rw 		SER
rw 		PG
rw
Toggle Fields.

PG

Bit 0: Programming.

Allowed values:
1: Program: Flash programming activated

SER

Bit 1: Sector Erase.

Allowed values:
1: SectorErase: Erase activated for selected sector

MER

Bit 2: Mass Erase.

Allowed values:
1: MassErase: Erase activated for all user sectors

SNB

Bits 3-6: Sector number.

Allowed values: 0-11

PSIZE

Bits 8-9: Program size.

Allowed values:
0: PSIZE8: Program x8
1: PSIZE16: Program x16
2: PSIZE32: Program x32
3: PSIZE64: Program x64

STRT

Bit 16: Start.

Allowed values:
1: Start: Trigger an erase operation

EOPIE

Bit 24: End of operation interrupt enable.

Allowed values:
0: Disabled: End of operation interrupt disabled
1: Enabled: End of operation interrupt enabled

ERRIE

Bit 25: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt generation disabled
1: Enabled: Error interrupt generation enabled

LOCK

Bit 31: Lock.

Allowed values:
0: Unlocked: FLASH_CR register is unlocked
1: Locked: FLASH_CR register is locked

OPTCR

Flash option control register

Offset: 0x14, reset: 0x00000014, access: read-write

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
nWRP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDP
rw 		nRST_STDBY
rw 		nRST_STOP
rw 		WDG_SW
rw 		BOR_LEV
rw 		OPTSTRT
rw 		OPTLOCK
rw
Toggle Fields.

OPTLOCK

Bit 0: Option lock.

OPTSTRT

Bit 1: Option start.

BOR_LEV

Bits 2-3: BOR reset Level.

WDG_SW

Bit 5: WDG_SW User option bytes.

nRST_STOP

Bit 6: nRST_STOP User option bytes.

nRST_STDBY

Bit 7: nRST_STDBY User option bytes.

RDP

Bits 8-15: Read protect.

nWRP

Bits 16-27: Not write protect.

FPU

0xE000EF34: Floting point unit

0/24 fields covered. Toggle Registers.

FPCCR

Floating-point context control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ASPEN
rw 		LSPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MONRDY
rw 		BFRDY
rw 		MMRDY
rw 		HFRDY
rw 		THREAD
rw 		USER
rw 		LSPACT
rw
Toggle Fields.

LSPACT

Bit 0: LSPACT.

USER

Bit 1: USER.

THREAD

Bit 3: THREAD.

HFRDY

Bit 4: HFRDY.

MMRDY

Bit 5: MMRDY.

BFRDY

Bit 6: BFRDY.

MONRDY

Bit 8: MONRDY.

LSPEN

Bit 30: LSPEN.

ASPEN

Bit 31: ASPEN.

FPCAR

Floating-point context address register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDRESS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDRESS
rw
Toggle Fields.

ADDRESS

Bits 3-31: Location of unpopulated floating-point.

FPSCR

Floating-point status control register

Offset: 0x8, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
N
rw 		Z
rw 		C
rw 		V
rw 		AHP
rw 		DN
rw 		FZ
rw 		RMode
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDC
rw 		IXC
rw 		UFC
rw 		OFC
rw 		DZC
rw 		IOC
rw
Toggle Fields.

IOC

Bit 0: Invalid operation cumulative exception bit.

DZC

Bit 1: Division by zero cumulative exception bit..

OFC

Bit 2: Overflow cumulative exception bit.

UFC

Bit 3: Underflow cumulative exception bit.

IXC

Bit 4: Inexact cumulative exception bit.

IDC

Bit 7: Input denormal cumulative exception bit..

RMode

Bits 22-23: Rounding Mode control field.

FZ

Bit 24: Flush-to-zero mode control bit:.

DN

Bit 25: Default NaN mode control bit.

AHP

Bit 26: Alternative half-precision control bit.

V

Bit 28: Overflow condition code flag.

C

Bit 29: Carry condition code flag.

Z

Bit 30: Zero condition code flag.

N

Bit 31: Negative condition code flag.

FPU_CPACR

0xE000ED88: Floating point unit CPACR

0/1 fields covered. Toggle Registers.

CPACR

Coprocessor access control register

Offset: 0x0, reset: 0x0000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

CP

Bits 20-23: CP.

GPIOA

0x40020000: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0xA8000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x64000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

GPIOB

0x40020400: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0x00000280, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x000000C0, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000100, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

GPIOC

0x40020800: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

GPIOD

0X40020C00: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

GPIOE

0x40021000: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

GPIOH

0x40021C00: General-purpose I/Os

161/161 fields covered. Toggle Registers.

MODER

GPIO port mode register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MODER15
rw 		MODER14
rw 		MODER13
rw 		MODER12
rw 		MODER11
rw 		MODER10
rw 		MODER9
rw 		MODER8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MODER7
rw 		MODER6
rw 		MODER5
rw 		MODER4
rw 		MODER3
rw 		MODER2
rw 		MODER1
rw 		MODER0
rw
Toggle Fields.

MODER0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OT15
rw 		OT14
rw 		OT13
rw 		OT12
rw 		OT11
rw 		OT10
rw 		OT9
rw 		OT8
rw 		OT7
rw 		OT6
rw 		OT5
rw 		OT4
rw 		OT3
rw 		OT2
rw 		OT1
rw 		OT0
rw
Toggle Fields.

OT0

Bit 0: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT1

Bit 1: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT2

Bit 2: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT3

Bit 3: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT4

Bit 4: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT5

Bit 5: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT6

Bit 6: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT7

Bit 7: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT8

Bit 8: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT9

Bit 9: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT10

Bit 10: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT11

Bit 11: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT12

Bit 12: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT13

Bit 13: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT14

Bit 14: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT15

Bit 15: Port x configuration bits (y = 0..15).

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPEEDR15
rw 		OSPEEDR14
rw 		OSPEEDR13
rw 		OSPEEDR12
rw 		OSPEEDR11
rw 		OSPEEDR10
rw 		OSPEEDR9
rw 		OSPEEDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPEEDR7
rw 		OSPEEDR6
rw 		OSPEEDR5
rw 		OSPEEDR4
rw 		OSPEEDR3
rw 		OSPEEDR2
rw 		OSPEEDR1
rw 		OSPEEDR0
rw
Toggle Fields.

OSPEEDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUPDR15
rw 		PUPDR14
rw 		PUPDR13
rw 		PUPDR12
rw 		PUPDR11
rw 		PUPDR10
rw 		PUPDR9
rw 		PUPDR8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUPDR7
rw 		PUPDR6
rw 		PUPDR5
rw 		PUPDR4
rw 		PUPDR3
rw 		PUPDR2
rw 		PUPDR1
rw 		PUPDR0
rw
Toggle Fields.

PUPDR0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDR15
r 		IDR14
r 		IDR13
r 		IDR12
r 		IDR11
r 		IDR10
r 		IDR9
r 		IDR8
r 		IDR7
r 		IDR6
r 		IDR5
r 		IDR4
r 		IDR3
r 		IDR2
r 		IDR1
r 		IDR0
r
Toggle Fields.

IDR0

Bit 0: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR1

Bit 1: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR2

Bit 2: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR3

Bit 3: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR4

Bit 4: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR5

Bit 5: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR6

Bit 6: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR7

Bit 7: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR8

Bit 8: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR9

Bit 9: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR10

Bit 10: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR11

Bit 11: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR12

Bit 12: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR13

Bit 13: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR14

Bit 14: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

IDR15

Bit 15: Port input data (y = 0..15).

Allowed values:
1: High: Input is logic high
0: Low: Input is logic low

ODR

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ODR15
rw 		ODR14
rw 		ODR13
rw 		ODR12
rw 		ODR11
rw 		ODR10
rw 		ODR9
rw 		ODR8
rw 		ODR7
rw 		ODR6
rw 		ODR5
rw 		ODR4
rw 		ODR3
rw 		ODR2
rw 		ODR1
rw 		ODR0
rw
Toggle Fields.

ODR0

Bit 0: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR1

Bit 1: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR2

Bit 2: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR3

Bit 3: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR4

Bit 4: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR5

Bit 5: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR6

Bit 6: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR7

Bit 7: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR8

Bit 8: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR9

Bit 9: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR10

Bit 10: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR11

Bit 11: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR12

Bit 12: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR13

Bit 13: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR14

Bit 14: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

ODR15

Bit 15: Port output data (y = 0..15).

Allowed values:
1: High: Set output to logic high
0: Low: Set output to logic low

BSRR

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BR15
w 		BR14
w 		BR13
w 		BR12
w 		BR11
w 		BR10
w 		BR9
w 		BR8
w 		BR7
w 		BR6
w 		BR5
w 		BR4
w 		BR3
w 		BR2
w 		BR1
w 		BR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BS15
w 		BS14
w 		BS13
w 		BS12
w 		BS11
w 		BS10
w 		BS9
w 		BS8
w 		BS7
w 		BS6
w 		BS5
w 		BS4
w 		BS3
w 		BS2
w 		BS1
w 		BS0
w
Toggle Fields.

BS0

Bit 0: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS1

Bit 1: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS2

Bit 2: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS3

Bit 3: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS4

Bit 4: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS5

Bit 5: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS6

Bit 6: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS7

Bit 7: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS8

Bit 8: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS9

Bit 9: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS10

Bit 10: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS11

Bit 11: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS12

Bit 12: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS13

Bit 13: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS14

Bit 14: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS15

Bit 15: Port x set bit y (y= 0..15).

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR0

Bit 16: Port x set bit y (y= 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR1

Bit 17: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR2

Bit 18: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR3

Bit 19: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR4

Bit 20: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR5

Bit 21: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR6

Bit 22: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR7

Bit 23: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR8

Bit 24: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR9

Bit 25: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR10

Bit 26: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR11

Bit 27: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR12

Bit 28: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR13

Bit 29: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR14

Bit 30: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR15

Bit 31: Port x reset bit y (y = 0..15).

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LCKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LCK15
rw 		LCK14
rw 		LCK13
rw 		LCK12
rw 		LCK11
rw 		LCK10
rw 		LCK9
rw 		LCK8
rw 		LCK7
rw 		LCK6
rw 		LCK5
rw 		LCK4
rw 		LCK3
rw 		LCK2
rw 		LCK1
rw 		LCK0
rw
Toggle Fields.

LCK0

Bit 0: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK1

Bit 1: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK2

Bit 2: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK3

Bit 3: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK4

Bit 4: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK5

Bit 5: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK6

Bit 6: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK7

Bit 7: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK8

Bit 8: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK9

Bit 9: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK10

Bit 10: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK11

Bit 11: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK12

Bit 12: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK13

Bit 13: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK14

Bit 14: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK15

Bit 15: Port x lock bit y (y= 0..15).

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRL7
rw 		AFRL6
rw 		AFRL5
rw 		AFRL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRL3
rw 		AFRL2
rw 		AFRL1
rw 		AFRL0
rw
Toggle Fields.

AFRL0

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL1

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL2

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL3

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL4

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL5

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL6

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRL7

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AFRH15
rw 		AFRH14
rw 		AFRH13
rw 		AFRH12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
AFRH11
rw 		AFRH10
rw 		AFRH9
rw 		AFRH8
rw
Toggle Fields.

AFRH8

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH9

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH10

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH11

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH12

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH13

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH14

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH15

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

I2C1

0x40005400: Inter-integrated circuit

51/51 fields covered. Toggle Registers.

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWRST
rw 		ALERT
rw 		PEC
rw 		POS
rw 		ACK
rw 		STOP
rw 		START
rw 		NOSTRETCH
rw 		ENGC
rw 		ENPEC
rw 		ENARP
rw 		SMBTYPE
rw 		SMBUS
rw 		PE
rw
Toggle Fields.

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBUS

Bit 1: SMBus mode.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBTYPE

Bit 3: SMBus type.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ENARP

Bit 4: ARP enable.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

ENPEC

Bit 5: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

ENGC

Bit 6: General call enable.

Allowed values:
0: Disabled: General call disabled
1: Enabled: General call enabled

NOSTRETCH

Bit 7: Clock stretching disable (Slave mode).

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: In master mode: repeated start generation, in slave mode: start generation when bus is free

STOP

Bit 9: Stop generation.

Allowed values:
0: NoStop: No Stop generation
1: Stop: In master mode: stop generation after current byte/start, in slave mode: release SCL and SDA after current byte

ACK

Bit 10: Acknowledge enable.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POS

Bit 11: Acknowledge/PEC Position (for data reception).

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PEC

Bit 12: Packet error checking.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

ALERT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SWRST

Bit 15: Software reset.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LAST
rw 		DMAEN
rw 		ITBUFEN
rw 		ITEVTEN
rw 		ITERREN
rw 		FREQ
rw
Toggle Fields.

FREQ

Bits 0-5: Peripheral clock frequency.

Allowed values: 2-50

ITERREN

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

ITEVTEN

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

ITBUFEN

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TxE=1 or RxNE=1 does not generate any interrupt
1: Enabled: TxE=1 or RxNE=1 generates Event interrupt

DMAEN

Bit 11: DMA requests enable.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA request enabled when TxE=1 or RxNE=1

LAST

Bit 12: DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

OAR1

Own address register 1

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDMODE
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDMODE

Bit 15: Addressing mode (slave mode).

Allowed values:
0: ADD7: 7-bit slave address
1: ADD10: 10-bit slave address

OAR2

Own address register 2

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADD2
rw 		ENDUAL
rw
Toggle Fields.

ENDUAL

Bit 0: Dual addressing mode enable.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADD2

Bits 1-7: Interface address.

Allowed values: 0-127

DR

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-7: 8-bit data register.

Allowed values: 0-255

SR1

Status register 1

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALERT
rw 		TIMEOUT
rw 		PECERR
rw 		OVR
rw 		AF
rw 		ARLO
rw 		BERR
rw 		TxE
r 		RxNE
r 		STOPF
r 		ADD10
r 		BTF
r 		ADDR
r 		SB
r
Toggle Fields.

SB

Bit 0: Start bit (Master mode).

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDR

Bit 1: Address sent (master mode)/matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTF

Bit 2: Byte transfer finished.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10

Bit 3: 10-bit header sent (Master mode).

STOPF

Bit 4: Stop detection (slave mode).

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RxNE

Bit 6: Data register not empty (receivers).

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty

TxE

Bit 7: Data register empty (transmitters).

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

ARLO

Bit 9: Arbitration lost (master mode).

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AF

Bit 10: Acknowledge failure.

Allowed values:
0: NoFailure: No acknowledge failure
1: Failure: Acknowledge failure

OVR

Bit 11: Overrun/Underrun.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC Error in reception.

Allowed values:
0: NoError: no PEC error: receiver returns ACK after PEC reception (if ACK=1)
1: Error: PEC error: receiver returns NACK after PEC reception (whatever ACK)

TIMEOUT

Bit 14: Timeout or Tlow error.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained LOW for 25 ms

SMBALERT

Bit 15: SMBus alert.

Allowed values:
0: NoAlert: No SMBALERT occured
1: Alert: SMBALERT occurred

SR2

Status register 2

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PEC
r 		DUALF
r 		SMBHOST
r 		SMBDEFAULT
r 		GENCALL
r 		TRA
r 		BUSY
r 		MSL
r
Toggle Fields.

MSL

Bit 0: Master/slave.

BUSY

Bit 1: Bus busy.

TRA

Bit 2: Transmitter/receiver.

GENCALL

Bit 4: General call address (Slave mode).

SMBDEFAULT

Bit 5: SMBus device default address (Slave mode).

SMBHOST

Bit 6: SMBus host header (Slave mode).

DUALF

Bit 7: Dual flag (Slave mode).

PEC

Bits 8-15: acket error checking register.

CCR

Clock control register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
F_S
rw 		DUTY
rw 		CCR
rw
Toggle Fields.

CCR

Bits 0-11: Clock control register in Fast/Standard mode (Master mode).

Allowed values: 1-4095

DUTY

Bit 14: Fast mode duty cycle.

Allowed values:
0: Duty2_1: Duty cycle t_low/t_high = 2/1
1: Duty16_9: Duty cycle t_low/t_high = 16/9

F_S

Bit 15: I2C master mode selection.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

TRISE

TRISE register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRISE
rw
Toggle Fields.

TRISE

Bits 0-5: Maximum rise time in Fast/Standard mode (Master mode).

Allowed values: 0-63

I2C2

0x40005800: Inter-integrated circuit

51/51 fields covered. Toggle Registers.

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWRST
rw 		ALERT
rw 		PEC
rw 		POS
rw 		ACK
rw 		STOP
rw 		START
rw 		NOSTRETCH
rw 		ENGC
rw 		ENPEC
rw 		ENARP
rw 		SMBTYPE
rw 		SMBUS
rw 		PE
rw
Toggle Fields.

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBUS

Bit 1: SMBus mode.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBTYPE

Bit 3: SMBus type.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ENARP

Bit 4: ARP enable.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

ENPEC

Bit 5: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

ENGC

Bit 6: General call enable.

Allowed values:
0: Disabled: General call disabled
1: Enabled: General call enabled

NOSTRETCH

Bit 7: Clock stretching disable (Slave mode).

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: In master mode: repeated start generation, in slave mode: start generation when bus is free

STOP

Bit 9: Stop generation.

Allowed values:
0: NoStop: No Stop generation
1: Stop: In master mode: stop generation after current byte/start, in slave mode: release SCL and SDA after current byte

ACK

Bit 10: Acknowledge enable.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POS

Bit 11: Acknowledge/PEC Position (for data reception).

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PEC

Bit 12: Packet error checking.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

ALERT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SWRST

Bit 15: Software reset.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LAST
rw 		DMAEN
rw 		ITBUFEN
rw 		ITEVTEN
rw 		ITERREN
rw 		FREQ
rw
Toggle Fields.

FREQ

Bits 0-5: Peripheral clock frequency.

Allowed values: 2-50

ITERREN

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

ITEVTEN

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

ITBUFEN

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TxE=1 or RxNE=1 does not generate any interrupt
1: Enabled: TxE=1 or RxNE=1 generates Event interrupt

DMAEN

Bit 11: DMA requests enable.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA request enabled when TxE=1 or RxNE=1

LAST

Bit 12: DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

OAR1

Own address register 1

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDMODE
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDMODE

Bit 15: Addressing mode (slave mode).

Allowed values:
0: ADD7: 7-bit slave address
1: ADD10: 10-bit slave address

OAR2

Own address register 2

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADD2
rw 		ENDUAL
rw
Toggle Fields.

ENDUAL

Bit 0: Dual addressing mode enable.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADD2

Bits 1-7: Interface address.

Allowed values: 0-127

DR

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-7: 8-bit data register.

Allowed values: 0-255

SR1

Status register 1

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALERT
rw 		TIMEOUT
rw 		PECERR
rw 		OVR
rw 		AF
rw 		ARLO
rw 		BERR
rw 		TxE
r 		RxNE
r 		STOPF
r 		ADD10
r 		BTF
r 		ADDR
r 		SB
r
Toggle Fields.

SB

Bit 0: Start bit (Master mode).

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDR

Bit 1: Address sent (master mode)/matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTF

Bit 2: Byte transfer finished.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10

Bit 3: 10-bit header sent (Master mode).

STOPF

Bit 4: Stop detection (slave mode).

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RxNE

Bit 6: Data register not empty (receivers).

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty

TxE

Bit 7: Data register empty (transmitters).

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

ARLO

Bit 9: Arbitration lost (master mode).

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AF

Bit 10: Acknowledge failure.

Allowed values:
0: NoFailure: No acknowledge failure
1: Failure: Acknowledge failure

OVR

Bit 11: Overrun/Underrun.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC Error in reception.

Allowed values:
0: NoError: no PEC error: receiver returns ACK after PEC reception (if ACK=1)
1: Error: PEC error: receiver returns NACK after PEC reception (whatever ACK)

TIMEOUT

Bit 14: Timeout or Tlow error.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained LOW for 25 ms

SMBALERT

Bit 15: SMBus alert.

Allowed values:
0: NoAlert: No SMBALERT occured
1: Alert: SMBALERT occurred

SR2

Status register 2

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PEC
r 		DUALF
r 		SMBHOST
r 		SMBDEFAULT
r 		GENCALL
r 		TRA
r 		BUSY
r 		MSL
r
Toggle Fields.

MSL

Bit 0: Master/slave.

BUSY

Bit 1: Bus busy.

TRA

Bit 2: Transmitter/receiver.

GENCALL

Bit 4: General call address (Slave mode).

SMBDEFAULT

Bit 5: SMBus device default address (Slave mode).

SMBHOST

Bit 6: SMBus host header (Slave mode).

DUALF

Bit 7: Dual flag (Slave mode).

PEC

Bits 8-15: acket error checking register.

CCR

Clock control register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
F_S
rw 		DUTY
rw 		CCR
rw
Toggle Fields.

CCR

Bits 0-11: Clock control register in Fast/Standard mode (Master mode).

Allowed values: 1-4095

DUTY

Bit 14: Fast mode duty cycle.

Allowed values:
0: Duty2_1: Duty cycle t_low/t_high = 2/1
1: Duty16_9: Duty cycle t_low/t_high = 16/9

F_S

Bit 15: I2C master mode selection.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

TRISE

TRISE register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRISE
rw
Toggle Fields.

TRISE

Bits 0-5: Maximum rise time in Fast/Standard mode (Master mode).

Allowed values: 0-63

I2C3

0x40005C00: Inter-integrated circuit

51/51 fields covered. Toggle Registers.

CR1

Control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWRST
rw 		ALERT
rw 		PEC
rw 		POS
rw 		ACK
rw 		STOP
rw 		START
rw 		NOSTRETCH
rw 		ENGC
rw 		ENPEC
rw 		ENARP
rw 		SMBTYPE
rw 		SMBUS
rw 		PE
rw
Toggle Fields.

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBUS

Bit 1: SMBus mode.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBTYPE

Bit 3: SMBus type.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ENARP

Bit 4: ARP enable.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

ENPEC

Bit 5: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

ENGC

Bit 6: General call enable.

Allowed values:
0: Disabled: General call disabled
1: Enabled: General call enabled

NOSTRETCH

Bit 7: Clock stretching disable (Slave mode).

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: In master mode: repeated start generation, in slave mode: start generation when bus is free

STOP

Bit 9: Stop generation.

Allowed values:
0: NoStop: No Stop generation
1: Stop: In master mode: stop generation after current byte/start, in slave mode: release SCL and SDA after current byte

ACK

Bit 10: Acknowledge enable.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POS

Bit 11: Acknowledge/PEC Position (for data reception).

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PEC

Bit 12: Packet error checking.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

ALERT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SWRST

Bit 15: Software reset.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CR2

Control register 2

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LAST
rw 		DMAEN
rw 		ITBUFEN
rw 		ITEVTEN
rw 		ITERREN
rw 		FREQ
rw
Toggle Fields.

FREQ

Bits 0-5: Peripheral clock frequency.

Allowed values: 2-50

ITERREN

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

ITEVTEN

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

ITBUFEN

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TxE=1 or RxNE=1 does not generate any interrupt
1: Enabled: TxE=1 or RxNE=1 generates Event interrupt

DMAEN

Bit 11: DMA requests enable.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA request enabled when TxE=1 or RxNE=1

LAST

Bit 12: DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

OAR1

Own address register 1

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDMODE
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDMODE

Bit 15: Addressing mode (slave mode).

Allowed values:
0: ADD7: 7-bit slave address
1: ADD10: 10-bit slave address

OAR2

Own address register 2

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADD2
rw 		ENDUAL
rw
Toggle Fields.

ENDUAL

Bit 0: Dual addressing mode enable.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADD2

Bits 1-7: Interface address.

Allowed values: 0-127

DR

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-7: 8-bit data register.

Allowed values: 0-255

SR1

Status register 1

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALERT
rw 		TIMEOUT
rw 		PECERR
rw 		OVR
rw 		AF
rw 		ARLO
rw 		BERR
rw 		TxE
r 		RxNE
r 		STOPF
r 		ADD10
r 		BTF
r 		ADDR
r 		SB
r
Toggle Fields.

SB

Bit 0: Start bit (Master mode).

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDR

Bit 1: Address sent (master mode)/matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTF

Bit 2: Byte transfer finished.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10

Bit 3: 10-bit header sent (Master mode).

STOPF

Bit 4: Stop detection (slave mode).

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RxNE

Bit 6: Data register not empty (receivers).

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty

TxE

Bit 7: Data register empty (transmitters).

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

ARLO

Bit 9: Arbitration lost (master mode).

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AF

Bit 10: Acknowledge failure.

Allowed values:
0: NoFailure: No acknowledge failure
1: Failure: Acknowledge failure

OVR

Bit 11: Overrun/Underrun.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC Error in reception.

Allowed values:
0: NoError: no PEC error: receiver returns ACK after PEC reception (if ACK=1)
1: Error: PEC error: receiver returns NACK after PEC reception (whatever ACK)

TIMEOUT

Bit 14: Timeout or Tlow error.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained LOW for 25 ms

SMBALERT

Bit 15: SMBus alert.

Allowed values:
0: NoAlert: No SMBALERT occured
1: Alert: SMBALERT occurred

SR2

Status register 2

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PEC
r 		DUALF
r 		SMBHOST
r 		SMBDEFAULT
r 		GENCALL
r 		TRA
r 		BUSY
r 		MSL
r
Toggle Fields.

MSL

Bit 0: Master/slave.

BUSY

Bit 1: Bus busy.

TRA

Bit 2: Transmitter/receiver.

GENCALL

Bit 4: General call address (Slave mode).

SMBDEFAULT

Bit 5: SMBus device default address (Slave mode).

SMBHOST

Bit 6: SMBus host header (Slave mode).

DUALF

Bit 7: Dual flag (Slave mode).

PEC

Bits 8-15: acket error checking register.

CCR

Clock control register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
F_S
rw 		DUTY
rw 		CCR
rw
Toggle Fields.

CCR

Bits 0-11: Clock control register in Fast/Standard mode (Master mode).

Allowed values: 1-4095

DUTY

Bit 14: Fast mode duty cycle.

Allowed values:
0: Duty2_1: Duty cycle t_low/t_high = 2/1
1: Duty16_9: Duty cycle t_low/t_high = 16/9

F_S

Bit 15: I2C master mode selection.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

TRISE

TRISE register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRISE
rw
Toggle Fields.

TRISE

Bits 0-5: Maximum rise time in Fast/Standard mode (Master mode).

Allowed values: 0-63

I2S2ext

0x40003400: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

I2S3ext

0x40004000: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

IWDG

0x40003000: Independent watchdog

5/5 fields covered. Toggle Registers.

KR

Key register

Offset: 0x0, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields.

KEY

Bits 0-15: Key value.

Allowed values:
21845: Enable: Enable access to PR, RLR and WINR registers (0x5555)
43690: Reset: Reset the watchdog value (0xAAAA)
52428: Start: Start the watchdog (0xCCCC)

PR

Prescaler register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PR
rw
Toggle Fields.

PR

Bits 0-2: Prescaler divider.

Allowed values:
0: DivideBy4: Divider /4
1: DivideBy8: Divider /8
2: DivideBy16: Divider /16
3: DivideBy32: Divider /32
4: DivideBy64: Divider /64
5: DivideBy128: Divider /128
6: DivideBy256: Divider /256
7: DivideBy256bis: Divider /256

RLR

Reload register

Offset: 0x8, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RL
rw
Toggle Fields.

RL

Bits 0-11: Watchdog counter reload value.

Allowed values: 0-4095

SR

Status register

Offset: 0xC, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RVU
r 		PVU
r
Toggle Fields.

PVU

Bit 0: Watchdog prescaler value update.

RVU

Bit 1: Watchdog counter reload value update.

MPU

0xE000ED90: Memory protection unit

6/19 fields covered. Toggle Registers.

MPU_TYPER

MPU type register

Offset: 0x0, reset: 0X00000800, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IREGION
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DREGION
r 		SEPARATE
r
Toggle Fields.

SEPARATE

Bit 0: Separate flag.

DREGION

Bits 8-15: Number of MPU data regions.

IREGION

Bits 16-23: Number of MPU instruction regions.

MPU_CTRL

MPU control register

Offset: 0x4, reset: 0X00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRIVDEFENA
r 		HFNMIENA
r 		ENABLE
r
Toggle Fields.

ENABLE

Bit 0: Enables the MPU.

HFNMIENA

Bit 1: Enables the operation of MPU during hard fault.

PRIVDEFENA

Bit 2: Enable priviliged software access to default memory map.

MPU_RNR

MPU region number register

Offset: 0x8, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REGION
rw
Toggle Fields.

REGION

Bits 0-7: MPU region.

MPU_RBAR

MPU region base address register

Offset: 0xC, reset: 0X00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDR
rw 		VALID
rw 		REGION
rw
Toggle Fields.

REGION

Bits 0-3: MPU region field.

VALID

Bit 4: MPU region number valid.

ADDR

Bits 5-31: Region base address field.

MPU_RASR

MPU region attribute and size register

Offset: 0x10, reset: 0X00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
XN
rw 		AP
rw 		TEX
rw 		S
rw 		C
rw 		B
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRD
rw 		SIZE
rw 		ENABLE
rw
Toggle Fields.

ENABLE

Bit 0: Region enable bit..

SIZE

Bits 1-5: Size of the MPU protection region.

SRD

Bits 8-15: Subregion disable bits.

B

Bit 16: memory attribute.

C

Bit 17: memory attribute.

S

Bit 18: Shareable memory attribute.

TEX

Bits 19-21: memory attribute.

AP

Bits 24-26: Access permission.

XN

Bit 28: Instruction access disable bit.

NVIC

0xE000E100: Nested Vectored Interrupt Controller

3/95 fields covered. Toggle Registers.

ISER0

Interrupt Set-Enable Register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETENA
rw
Toggle Fields.

SETENA

Bits 0-31: SETENA.

ISER1

Interrupt Set-Enable Register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETENA
rw
Toggle Fields.

SETENA

Bits 0-31: SETENA.

ISER2

Interrupt Set-Enable Register

Offset: 0x8, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETENA
rw
Toggle Fields.

SETENA

Bits 0-31: SETENA.

ICER0

Interrupt Clear-Enable Register

Offset: 0x80, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRENA
rw
Toggle Fields.

CLRENA

Bits 0-31: CLRENA.

ICER1

Interrupt Clear-Enable Register

Offset: 0x84, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRENA
rw
Toggle Fields.

CLRENA

Bits 0-31: CLRENA.

ICER2

Interrupt Clear-Enable Register

Offset: 0x88, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRENA
rw
Toggle Fields.

CLRENA

Bits 0-31: CLRENA.

ISPR0

Interrupt Set-Pending Register

Offset: 0x100, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETPEND
rw
Toggle Fields.

SETPEND

Bits 0-31: SETPEND.

ISPR1

Interrupt Set-Pending Register

Offset: 0x104, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETPEND
rw
Toggle Fields.

SETPEND

Bits 0-31: SETPEND.

ISPR2

Interrupt Set-Pending Register

Offset: 0x108, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETPEND
rw
Toggle Fields.

SETPEND

Bits 0-31: SETPEND.

ICPR0

Interrupt Clear-Pending Register

Offset: 0x180, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRPEND
rw
Toggle Fields.

CLRPEND

Bits 0-31: CLRPEND.

ICPR1

Interrupt Clear-Pending Register

Offset: 0x184, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRPEND
rw
Toggle Fields.

CLRPEND

Bits 0-31: CLRPEND.

ICPR2

Interrupt Clear-Pending Register

Offset: 0x188, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRPEND
rw
Toggle Fields.

CLRPEND

Bits 0-31: CLRPEND.

IABR0

Interrupt Active Bit Register

Offset: 0x200, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ACTIVE
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ACTIVE
r
Toggle Fields.

ACTIVE

Bits 0-31: ACTIVE.

IABR1

Interrupt Active Bit Register

Offset: 0x204, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ACTIVE
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ACTIVE
r
Toggle Fields.

ACTIVE

Bits 0-31: ACTIVE.

IABR2

Interrupt Active Bit Register

Offset: 0x208, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ACTIVE
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ACTIVE
r
Toggle Fields.

ACTIVE

Bits 0-31: ACTIVE.

IPR0

Interrupt Priority Register

Offset: 0x300, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR1

Interrupt Priority Register

Offset: 0x304, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR2

Interrupt Priority Register

Offset: 0x308, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR3

Interrupt Priority Register

Offset: 0x30C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR4

Interrupt Priority Register

Offset: 0x310, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR5

Interrupt Priority Register

Offset: 0x314, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR6

Interrupt Priority Register

Offset: 0x318, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR7

Interrupt Priority Register

Offset: 0x31C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR8

Interrupt Priority Register

Offset: 0x320, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR9

Interrupt Priority Register

Offset: 0x324, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR10

Interrupt Priority Register

Offset: 0x328, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR11

Interrupt Priority Register

Offset: 0x32C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR12

Interrupt Priority Register

Offset: 0x330, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR13

Interrupt Priority Register

Offset: 0x334, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR14

Interrupt Priority Register

Offset: 0x338, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR15

Interrupt Priority Register

Offset: 0x33C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR16

Interrupt Priority Register

Offset: 0x340, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR17

Interrupt Priority Register

Offset: 0x344, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR18

Interrupt Priority Register

Offset: 0x348, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR19

Interrupt Priority Register

Offset: 0x34C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IPR_N3
rw 		IPR_N2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IPR_N1
rw 		IPR_N0
rw
Toggle Fields.

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

NVIC_STIR

0xE000EF00: Nested vectored interrupt controller

0/1 fields covered. Toggle Registers.

STIR

Software trigger interrupt register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTID
rw
Toggle Fields.

INTID

Bits 0-8: Software generated interrupt ID.

OTG_FS_DEVICE

0x50000800: USB on the go full speed

29/152 fields covered. Toggle Registers.

DCFG

OTG_FS device configuration register (OTG_FS_DCFG)

Offset: 0x0, reset: 0x02200000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PFIVL
rw 		DAD
rw 		NZLSOHSK
rw 		DSPD
rw
Toggle Fields.

DSPD

Bits 0-1: Device speed.

NZLSOHSK

Bit 2: Non-zero-length status OUT handshake.

DAD

Bits 4-10: Device address.

PFIVL

Bits 11-12: Periodic frame interval.

DCTL

OTG_FS device control register (OTG_FS_DCTL)

Offset: 0x4, reset: 0x00000000, access: Unspecified

2/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POPRGDNE
rw 		CGONAK
rw 		SGONAK
rw 		CGINAK
rw 		SGINAK
rw 		TCTL
rw 		GONSTS
r 		GINSTS
r 		SDIS
rw 		RWUSIG
rw
Toggle Fields.

RWUSIG

Bit 0: Remote wakeup signaling.

SDIS

Bit 1: Soft disconnect.

GINSTS

Bit 2: Global IN NAK status.

GONSTS

Bit 3: Global OUT NAK status.

TCTL

Bits 4-6: Test control.

SGINAK

Bit 7: Set global IN NAK.

CGINAK

Bit 8: Clear global IN NAK.

SGONAK

Bit 9: Set global OUT NAK.

CGONAK

Bit 10: Clear global OUT NAK.

POPRGDNE

Bit 11: Power-on programming done.

DSTS

OTG_FS device status register (OTG_FS_DSTS)

Offset: 0x8, reset: 0x00000010, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FNSOF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FNSOF
r 		EERR
r 		ENUMSPD
r 		SUSPSTS
r
Toggle Fields.

SUSPSTS

Bit 0: Suspend status.

ENUMSPD

Bits 1-2: Enumerated speed.

EERR

Bit 3: Erratic error.

FNSOF

Bits 8-21: Frame number of the received SOF.

DIEPMSK

OTG_FS device IN endpoint common interrupt mask register (OTG_FS_DIEPMSK)

Offset: 0x10, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPNEM
rw 		INEPNMM
rw 		ITTXFEMSK
rw 		TOM
rw 		EPDM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed interrupt mask.

EPDM

Bit 1: Endpoint disabled interrupt mask.

TOM

Bit 3: Timeout condition mask (Non-isochronous endpoints).

ITTXFEMSK

Bit 4: IN token received when TxFIFO empty mask.

INEPNMM

Bit 5: IN token received with EP mismatch mask.

INEPNEM

Bit 6: IN endpoint NAK effective mask.

DOEPMSK

OTG_FS device OUT endpoint common interrupt mask register (OTG_FS_DOEPMSK)

Offset: 0x14, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OTEPDM
rw 		STUPM
rw 		EPDM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed interrupt mask.

EPDM

Bit 1: Endpoint disabled interrupt mask.

STUPM

Bit 3: SETUP phase done mask.

OTEPDM

Bit 4: OUT token received when endpoint disabled mask.

DAINT

OTG_FS device all endpoints interrupt register (OTG_FS_DAINT)

Offset: 0x18, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OEPINT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IEPINT
r
Toggle Fields.

IEPINT

Bits 0-15: IN endpoint interrupt bits.

OEPINT

Bits 16-31: OUT endpoint interrupt bits.

DAINTMSK

OTG_FS all endpoints interrupt mask register (OTG_FS_DAINTMSK)

Offset: 0x1C, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OEPM
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IEPM
rw
Toggle Fields.

IEPM

Bits 0-15: IN EP interrupt mask bits.

OEPM

Bits 16-31: OUT EP interrupt mask bits.

DVBUSDIS

OTG_FS device VBUS discharge time register

Offset: 0x28, reset: 0x000017D7, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VBUSDT
rw
Toggle Fields.

VBUSDT

Bits 0-15: Device VBUS discharge time.

DVBUSPULSE

OTG_FS device VBUS pulsing time register

Offset: 0x2C, reset: 0x000005B8, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DVBUSP
rw
Toggle Fields.

DVBUSP

Bits 0-11: Device VBUS pulsing time.

DIEPEMPMSK

OTG_FS device IN endpoint FIFO empty interrupt mask register

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTXFEM
rw
Toggle Fields.

INEPTXFEM

Bits 0-15: IN EP Tx FIFO empty interrupt mask bits.

DIEPCTL0

OTG_FS device control IN endpoint 0 control register (OTG_FS_DIEPCTL0)

Offset: 0x100, reset: 0x00000000, access: Unspecified

4/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EPENA
rw 		EPDIS
r 		SNAK
w 		CNAK
w 		TXFNUM
rw 		STALL
rw 		EPTYP
r 		NAKSTS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USBAEP
r 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-1: Maximum packet size.

USBAEP

Bit 15: USB active endpoint.

NAKSTS

Bit 17: NAK status.

EPTYP

Bits 18-19: Endpoint type.

STALL

Bit 21: STALL handshake.

TXFNUM

Bits 22-25: TxFIFO number.

CNAK

Bit 26: Clear NAK.

SNAK

Bit 27: Set NAK.

EPDIS

Bit 30: Endpoint disable.

EPENA

Bit 31: Endpoint enable.

DIEPINT0

device endpoint-x interrupt register

Offset: 0x108, reset: 0x00000080, access: Unspecified

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFE
r 		INEPNE
rw 		ITTXFE
rw 		TOC
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

TOC

Bit 3: TOC.

ITTXFE

Bit 4: ITTXFE.

INEPNE

Bit 6: INEPNE.

TXFE

Bit 7: TXFE.

DIEPTSIZ0

device endpoint-0 transfer size register

Offset: 0x110, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PKTCNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-6: Transfer size.

PKTCNT

Bits 19-20: Packet count.

DTXFSTS0

OTG_FS device IN endpoint transmit FIFO status register

Offset: 0x118, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTFSAV
r
Toggle Fields.

INEPTFSAV

Bits 0-15: IN endpoint TxFIFO space available.

DIEPCTL%s

OTG device endpoint-1 control register

Offset: 0x120, reset: 0x00000000, access: Unspecified

2/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EPENA
rw 		EPDIS
rw 		SODDFRM_SD1PID
w 		SD0PID_SEVNFRM
w 		SNAK
w 		CNAK
w 		TXFNUM
rw 		STALL
rw 		EPTYP
rw 		NAKSTS
r 		EONUM_DPID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USBAEP
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: MPSIZ.

USBAEP

Bit 15: USBAEP.

EONUM_DPID

Bit 16: EONUM/DPID.

NAKSTS

Bit 17: NAKSTS.

EPTYP

Bits 18-19: EPTYP.

STALL

Bit 21: STALL.

TXFNUM

Bits 22-25: TXFNUM.

CNAK

Bit 26: CNAK.

SNAK

Bit 27: SNAK.

SD0PID_SEVNFRM

Bit 28: SD0PID/SEVNFRM.

SODDFRM_SD1PID

Bit 29: SODDFRM/SD1PID.

EPDIS

Bit 30: EPDIS.

EPENA

Bit 31: EPENA.

DIEPINT1

device endpoint-1 interrupt register

Offset: 0x128, reset: 0x00000080, access: Unspecified

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFE
r 		INEPNE
rw 		ITTXFE
rw 		TOC
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

TOC

Bit 3: TOC.

ITTXFE

Bit 4: ITTXFE.

INEPNE

Bit 6: INEPNE.

TXFE

Bit 7: TXFE.

DIEPTSIZ1

device endpoint-1 transfer size register

Offset: 0x130, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

MCNT

Bits 29-30: Multi count.

DTXFSTS1

OTG_FS device IN endpoint transmit FIFO status register

Offset: 0x138, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTFSAV
r
Toggle Fields.

INEPTFSAV

Bits 0-15: IN endpoint TxFIFO space available.

DIEPINT2

device endpoint-2 interrupt register

Offset: 0x148, reset: 0x00000080, access: Unspecified

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFE
r 		INEPNE
rw 		ITTXFE
rw 		TOC
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

TOC

Bit 3: TOC.

ITTXFE

Bit 4: ITTXFE.

INEPNE

Bit 6: INEPNE.

TXFE

Bit 7: TXFE.

DIEPTSIZ2

device endpoint-2 transfer size register

Offset: 0x150, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

MCNT

Bits 29-30: Multi count.

DTXFSTS2

OTG_FS device IN endpoint transmit FIFO status register

Offset: 0x158, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTFSAV
r
Toggle Fields.

INEPTFSAV

Bits 0-15: IN endpoint TxFIFO space available.

DIEPINT3

device endpoint-3 interrupt register

Offset: 0x168, reset: 0x00000080, access: Unspecified

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFE
r 		INEPNE
rw 		ITTXFE
rw 		TOC
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

TOC

Bit 3: TOC.

ITTXFE

Bit 4: ITTXFE.

INEPNE

Bit 6: INEPNE.

TXFE

Bit 7: TXFE.

DIEPTSIZ3

device endpoint-3 transfer size register

Offset: 0x170, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

MCNT

Bits 29-30: Multi count.

DTXFSTS3

OTG_FS device IN endpoint transmit FIFO status register

Offset: 0x178, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTFSAV
r
Toggle Fields.

INEPTFSAV

Bits 0-15: IN endpoint TxFIFO space available.

DOEPCTL0

device endpoint-0 control register

Offset: 0x300, reset: 0x00008000, access: Unspecified

5/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EPENA
w 		EPDIS
r 		SNAK
w 		CNAK
w 		STALL
rw 		SNPM
rw 		EPTYP
r 		NAKSTS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USBAEP
r 		MPSIZ
r
Toggle Fields.

MPSIZ

Bits 0-1: MPSIZ.

USBAEP

Bit 15: USBAEP.

NAKSTS

Bit 17: NAKSTS.

EPTYP

Bits 18-19: EPTYP.

SNPM

Bit 20: SNPM.

STALL

Bit 21: STALL.

CNAK

Bit 26: CNAK.

SNAK

Bit 27: SNAK.

EPDIS

Bit 30: EPDIS.

EPENA

Bit 31: EPENA.

DOEPINT0

device endpoint-0 interrupt register

Offset: 0x308, reset: 0x00000080, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
B2BSTUP
rw 		OTEPDIS
rw 		STUP
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

STUP

Bit 3: STUP.

OTEPDIS

Bit 4: OTEPDIS.

B2BSTUP

Bit 6: B2BSTUP.

DOEPTSIZ0

device OUT endpoint-0 transfer size register

Offset: 0x310, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
STUPCNT
rw 		PKTCNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-6: Transfer size.

PKTCNT

Bit 19: Packet count.

STUPCNT

Bits 29-30: SETUP packet count.

DOEPCTL%s

device endpoint-1 control register

Offset: 0x320, reset: 0x00000000, access: Unspecified

2/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EPENA
rw 		EPDIS
rw 		SODDFRM
w 		SD0PID_SEVNFRM
w 		SNAK
w 		CNAK
w 		STALL
rw 		SNPM
rw 		EPTYP
rw 		NAKSTS
r 		EONUM_DPID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USBAEP
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: MPSIZ.

USBAEP

Bit 15: USBAEP.

EONUM_DPID

Bit 16: EONUM/DPID.

NAKSTS

Bit 17: NAKSTS.

EPTYP

Bits 18-19: EPTYP.

SNPM

Bit 20: SNPM.

STALL

Bit 21: STALL.

CNAK

Bit 26: CNAK.

SNAK

Bit 27: SNAK.

SD0PID_SEVNFRM

Bit 28: SD0PID/SEVNFRM.

SODDFRM

Bit 29: SODDFRM.

EPDIS

Bit 30: EPDIS.

EPENA

Bit 31: EPENA.

DOEPINT1

device endpoint-1 interrupt register

Offset: 0x328, reset: 0x00000080, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
B2BSTUP
rw 		OTEPDIS
rw 		STUP
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

STUP

Bit 3: STUP.

OTEPDIS

Bit 4: OTEPDIS.

B2BSTUP

Bit 6: B2BSTUP.

DOEPTSIZ1

device OUT endpoint-1 transfer size register

Offset: 0x330, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXDPID_STUPCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

RXDPID_STUPCNT

Bits 29-30: Received data PID/SETUP packet count.

DOEPINT2

device endpoint-2 interrupt register

Offset: 0x348, reset: 0x00000080, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
B2BSTUP
rw 		OTEPDIS
rw 		STUP
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

STUP

Bit 3: STUP.

OTEPDIS

Bit 4: OTEPDIS.

B2BSTUP

Bit 6: B2BSTUP.

DOEPTSIZ2

device OUT endpoint-2 transfer size register

Offset: 0x350, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXDPID_STUPCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

RXDPID_STUPCNT

Bits 29-30: Received data PID/SETUP packet count.

DOEPINT3

device endpoint-3 interrupt register

Offset: 0x368, reset: 0x00000080, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
B2BSTUP
rw 		OTEPDIS
rw 		STUP
rw 		EPDISD
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: XFRC.

EPDISD

Bit 1: EPDISD.

STUP

Bit 3: STUP.

OTEPDIS

Bit 4: OTEPDIS.

B2BSTUP

Bit 6: B2BSTUP.

DOEPTSIZ3

device OUT endpoint-3 transfer size register

Offset: 0x370, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RXDPID_STUPCNT
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

RXDPID_STUPCNT

Bits 29-30: Received data PID/SETUP packet count.

OTG_FS_GLOBAL

0x50000000: USB on the go full speed

42/121 fields covered. Toggle Registers.

GOTGCTL

OTG_FS control and status register (OTG_FS_GOTGCTL)

Offset: 0x0, reset: 0x00000800, access: Unspecified

6/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BSVLD
r 		ASVLD
r 		DBCT
r 		CIDSTS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DHNPEN
rw 		HSHNPEN
rw 		HNPRQ
rw 		HNGSCS
r 		SRQ
rw 		SRQSCS
r
Toggle Fields.

SRQSCS

Bit 0: Session request success.

SRQ

Bit 1: Session request.

HNGSCS

Bit 8: Host negotiation success.

HNPRQ

Bit 9: HNP request.

HSHNPEN

Bit 10: Host set HNP enable.

DHNPEN

Bit 11: Device HNP enabled.

CIDSTS

Bit 16: Connector ID status.

DBCT

Bit 17: Long/short debounce time.

ASVLD

Bit 18: A-session valid.

BSVLD

Bit 19: B-session valid.

GOTGINT

OTG_FS interrupt register (OTG_FS_GOTGINT)

Offset: 0x4, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DBCDNE
rw 		ADTOCHG
rw 		HNGDET
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HNSSCHG
rw 		SRSSCHG
rw 		SEDET
rw
Toggle Fields.

SEDET

Bit 2: Session end detected.

SRSSCHG

Bit 8: Session request success status change.

HNSSCHG

Bit 9: Host negotiation success status change.

HNGDET

Bit 17: Host negotiation detected.

ADTOCHG

Bit 18: A-device timeout change.

DBCDNE

Bit 19: Debounce done.

GAHBCFG

OTG_FS AHB configuration register (OTG_FS_GAHBCFG)

Offset: 0x8, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PTXFELVL
rw 		TXFELVL
rw 		GINT
rw
Toggle Fields.

GINT

Bit 0: Global interrupt mask.

TXFELVL

Bit 7: TxFIFO empty level.

PTXFELVL

Bit 8: Periodic TxFIFO empty level.

GUSBCFG

OTG_FS USB configuration register (OTG_FS_GUSBCFG)

Offset: 0xC, reset: 0x00000A00, access: Unspecified

0/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTXPKT
rw 		FDMOD
rw 		FHMOD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRDT
rw 		HNPCAP
rw 		SRPCAP
rw 		PHYSEL
w 		TOCAL
rw
Toggle Fields.

TOCAL

Bits 0-2: FS timeout calibration.

PHYSEL

Bit 6: Full Speed serial transceiver select.

SRPCAP

Bit 8: SRP-capable.

HNPCAP

Bit 9: HNP-capable.

TRDT

Bits 10-13: USB turnaround time.

FHMOD

Bit 29: Force host mode.

FDMOD

Bit 30: Force device mode.

CTXPKT

Bit 31: Corrupt Tx packet.

GRSTCTL

OTG_FS reset register (OTG_FS_GRSTCTL)

Offset: 0x10, reset: 0x20000000, access: Unspecified

1/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
AHBIDL
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFNUM
rw 		TXFFLSH
rw 		RXFFLSH
rw 		FCRST
rw 		HSRST
rw 		CSRST
rw
Toggle Fields.

CSRST

Bit 0: Core soft reset.

HSRST

Bit 1: HCLK soft reset.

FCRST

Bit 2: Host frame counter reset.

RXFFLSH

Bit 4: RxFIFO flush.

TXFFLSH

Bit 5: TxFIFO flush.

TXFNUM

Bits 6-10: TxFIFO number.

AHBIDL

Bit 31: AHB master idle.

GINTSTS

OTG_FS core interrupt register (OTG_FS_GINTSTS)

Offset: 0x14, reset: 0x04000020, access: Unspecified

11/25 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WKUPINT
rw 		SRQINT
rw 		DISCINT
rw 		CIDSCHG
rw 		PTXFE
r 		HCINT
r 		HPRTINT
r 		IPXFR_INCOMPISOOUT
rw 		IISOIXFR
rw 		OEPINT
r 		IEPINT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EOPF
rw 		ISOODRP
rw 		ENUMDNE
rw 		USBRST
rw 		USBSUSP
rw 		ESUSP
rw 		GOUTNAKEFF
r 		GINAKEFF
r 		NPTXFE
r 		RXFLVL
r 		SOF
rw 		OTGINT
r 		MMIS
rw 		CMOD
r
Toggle Fields.

CMOD

Bit 0: Current mode of operation.

MMIS

Bit 1: Mode mismatch interrupt.

OTGINT

Bit 2: OTG interrupt.

SOF

Bit 3: Start of frame.

RXFLVL

Bit 4: RxFIFO non-empty.

NPTXFE

Bit 5: Non-periodic TxFIFO empty.

GINAKEFF

Bit 6: Global IN non-periodic NAK effective.

GOUTNAKEFF

Bit 7: Global OUT NAK effective.

ESUSP

Bit 10: Early suspend.

USBSUSP

Bit 11: USB suspend.

USBRST

Bit 12: USB reset.

ENUMDNE

Bit 13: Enumeration done.

ISOODRP

Bit 14: Isochronous OUT packet dropped interrupt.

EOPF

Bit 15: End of periodic frame interrupt.

IEPINT

Bit 18: IN endpoint interrupt.

OEPINT

Bit 19: OUT endpoint interrupt.

IISOIXFR

Bit 20: Incomplete isochronous IN transfer.

IPXFR_INCOMPISOOUT

Bit 21: Incomplete periodic transfer(Host mode)/Incomplete isochronous OUT transfer(Device mode).

HPRTINT

Bit 24: Host port interrupt.

HCINT

Bit 25: Host channels interrupt.

PTXFE

Bit 26: Periodic TxFIFO empty.

CIDSCHG

Bit 28: Connector ID status change.

DISCINT

Bit 29: Disconnect detected interrupt.

SRQINT

Bit 30: Session request/new session detected interrupt.

WKUPINT

Bit 31: Resume/remote wakeup detected interrupt.

GINTMSK

OTG_FS interrupt mask register (OTG_FS_GINTMSK)

Offset: 0x18, reset: 0x00000000, access: Unspecified

1/25 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUIM
rw 		SRQIM
rw 		DISCINT
rw 		CIDSCHGM
rw 		PTXFEM
rw 		HCIM
rw 		PRTIM
r 		IPXFRM_IISOOXFRM
rw 		IISOIXFRM
rw 		OEPINT
rw 		IEPINT
rw 		EPMISM
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EOPFM
rw 		ISOODRPM
rw 		ENUMDNEM
rw 		USBRST
rw 		USBSUSPM
rw 		ESUSPM
rw 		GONAKEFFM
rw 		GINAKEFFM
rw 		NPTXFEM
rw 		RXFLVLM
rw 		SOFM
rw 		OTGINT
rw 		MMISM
rw
Toggle Fields.

MMISM

Bit 1: Mode mismatch interrupt mask.

OTGINT

Bit 2: OTG interrupt mask.

SOFM

Bit 3: Start of frame mask.

RXFLVLM

Bit 4: Receive FIFO non-empty mask.

NPTXFEM

Bit 5: Non-periodic TxFIFO empty mask.

GINAKEFFM

Bit 6: Global non-periodic IN NAK effective mask.

GONAKEFFM

Bit 7: Global OUT NAK effective mask.

ESUSPM

Bit 10: Early suspend mask.

USBSUSPM

Bit 11: USB suspend mask.

USBRST

Bit 12: USB reset mask.

ENUMDNEM

Bit 13: Enumeration done mask.

ISOODRPM

Bit 14: Isochronous OUT packet dropped interrupt mask.

EOPFM

Bit 15: End of periodic frame interrupt mask.

EPMISM

Bit 17: Endpoint mismatch interrupt mask.

IEPINT

Bit 18: IN endpoints interrupt mask.

OEPINT

Bit 19: OUT endpoints interrupt mask.

IISOIXFRM

Bit 20: Incomplete isochronous IN transfer mask.

IPXFRM_IISOOXFRM

Bit 21: Incomplete periodic transfer mask(Host mode)/Incomplete isochronous OUT transfer mask(Device mode).

PRTIM

Bit 24: Host port interrupt mask.

HCIM

Bit 25: Host channels interrupt mask.

PTXFEM

Bit 26: Periodic TxFIFO empty mask.

CIDSCHGM

Bit 28: Connector ID status change mask.

DISCINT

Bit 29: Disconnect detected interrupt mask.

SRQIM

Bit 30: Session request/new session detected interrupt mask.

WUIM

Bit 31: Resume/remote wakeup detected interrupt mask.

GRXSTSR_Host

OTG_FS Receive status debug read(Host mode)

Offset: 0x1C, reset: 0x00000000, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FRMNUM
r 		PKTSTS
r 		DPID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DPID
r 		BCNT
r 		EPNUM
r
Toggle Fields.

EPNUM

Bits 0-3: Endpoint number.

BCNT

Bits 4-14: Byte count.

DPID

Bits 15-16: Data PID.

PKTSTS

Bits 17-20: Packet status.

FRMNUM

Bits 21-24: Frame number.

GRXFSIZ

OTG_FS Receive FIFO size register (OTG_FS_GRXFSIZ)

Offset: 0x24, reset: 0x00000200, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXFD
rw
Toggle Fields.

RXFD

Bits 0-15: RxFIFO depth.

HNPTXFSIZ

OTG_FS non-periodic transmit FIFO size register (Host mode)

Offset: 0x28, reset: 0x00000200, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NPTXFD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NPTXFSA
rw
Toggle Fields.

NPTXFSA

Bits 0-15: Non-periodic transmit RAM start address.

NPTXFD

Bits 16-31: Non-periodic TxFIFO depth.

GNPTXSTS

OTG_FS non-periodic transmit FIFO/queue status register (OTG_FS_GNPTXSTS)

Offset: 0x2C, reset: 0x00080200, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NPTXQTOP
r 		NPTQXSAV
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
NPTXFSAV
r
Toggle Fields.

NPTXFSAV

Bits 0-15: Non-periodic TxFIFO space available.

NPTQXSAV

Bits 16-23: Non-periodic transmit request queue space available.

NPTXQTOP

Bits 24-30: Top of the non-periodic transmit request queue.

GRXSTSP_Host

OTG status read and pop (host mode)

Offset: 0x32, reset: 0, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PKTSTS
r 		DPID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DPID
r 		BCNT
r 		CHNUM
r
Toggle Fields.

CHNUM

Bits 0-3: Channel number.

BCNT

Bits 4-14: Byte count.

DPID

Bits 15-16: Data PID.

PKTSTS

Bits 17-20: Packet status.

GCCFG

OTG_FS general core configuration register (OTG_FS_GCCFG)

Offset: 0x38, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SOFOUTEN
rw 		VBUSBSEN
rw 		VBUSASEN
rw 		PWRDWN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

PWRDWN

Bit 16: Power down.

VBUSASEN

Bit 18: Enable the VBUS sensing device.

VBUSBSEN

Bit 19: Enable the VBUS sensing device.

SOFOUTEN

Bit 20: SOF output enable.

CID

core ID register

Offset: 0x3C, reset: 0x00001000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRODUCT_ID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRODUCT_ID
rw
Toggle Fields.

PRODUCT_ID

Bits 0-31: Product ID field.

HPTXFSIZ

OTG_FS Host periodic transmit FIFO size register (OTG_FS_HPTXFSIZ)

Offset: 0x100, reset: 0x02000600, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PTXFSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PTXSA
rw
Toggle Fields.

PTXSA

Bits 0-15: Host periodic TxFIFO start address.

PTXFSIZ

Bits 16-31: Host periodic TxFIFO depth.

DIEPTXF%s

OTG_FS device IN endpoint transmit FIFO size register (OTG_FS_DIEPTXF2)

Offset: 0x104, reset: 0x02000400, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
INEPTXFD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INEPTXSA
rw
Toggle Fields.

INEPTXSA

Bits 0-15: IN endpoint FIFO2 transmit RAM start address.

INEPTXFD

Bits 16-31: IN endpoint TxFIFO depth.

OTG_FS_HOST

0x50000400: USB on the go full speed

10/279 fields covered. Toggle Registers.

HCFG

OTG_FS host configuration register (OTG_FS_HCFG)

Offset: 0x0, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FSLSS
r 		FSLSPCS
rw
Toggle Fields.

FSLSPCS

Bits 0-1: FS/LS PHY clock select.

FSLSS

Bit 2: FS- and LS-only support.

HFIR

OTG_FS Host frame interval register

Offset: 0x4, reset: 0x0000EA60, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRIVL
rw
Toggle Fields.

FRIVL

Bits 0-15: Frame interval.

HFNUM

OTG_FS host frame number/frame time remaining register (OTG_FS_HFNUM)

Offset: 0x8, reset: 0x00003FFF, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FTREM
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRNUM
r
Toggle Fields.

FRNUM

Bits 0-15: Frame number.

FTREM

Bits 16-31: Frame time remaining.

HPTXSTS

OTG_FS_Host periodic transmit FIFO/queue status register (OTG_FS_HPTXSTS)

Offset: 0x10, reset: 0x00080100, access: Unspecified

2/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PTXQTOP
r 		PTXQSAV
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PTXFSAVL
rw
Toggle Fields.

PTXFSAVL

Bits 0-15: Periodic transmit data FIFO space available.

PTXQSAV

Bits 16-23: Periodic transmit request queue space available.

PTXQTOP

Bits 24-31: Top of the periodic transmit request queue.

HAINT

OTG_FS Host all channels interrupt register

Offset: 0x14, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HAINT
r
Toggle Fields.

HAINT

Bits 0-15: Channel interrupts.

HAINTMSK

OTG_FS host all channels interrupt mask register

Offset: 0x18, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HAINTM
rw
Toggle Fields.

HAINTM

Bits 0-15: Channel interrupt mask.

HPRT

OTG_FS host port control and status register (OTG_FS_HPRT)

Offset: 0x40, reset: 0x00000000, access: Unspecified

4/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PSPD
r 		PTCTL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PTCTL
rw 		PPWR
rw 		PLSTS
r 		PRST
rw 		PSUSP
rw 		PRES
rw 		POCCHNG
rw 		POCA
r 		PENCHNG
rw 		PENA
rw 		PCDET
rw 		PCSTS
r
Toggle Fields.

PCSTS

Bit 0: Port connect status.

PCDET

Bit 1: Port connect detected.

PENA

Bit 2: Port enable.

PENCHNG

Bit 3: Port enable/disable change.

POCA

Bit 4: Port overcurrent active.

POCCHNG

Bit 5: Port overcurrent change.

PRES

Bit 6: Port resume.

PSUSP

Bit 7: Port suspend.

PRST

Bit 8: Port reset.

PLSTS

Bits 10-11: Port line status.

PPWR

Bit 12: Port power.

PTCTL

Bits 13-16: Port test control.

PSPD

Bits 17-18: Port speed.

HCCHAR0

OTG_FS host channel-0 characteristics register (OTG_FS_HCCHAR0)

Offset: 0x100, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT0

OTG_FS host channel-0 interrupt register (OTG_FS_HCINT0)

Offset: 0x108, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK0

OTG_FS host channel-0 mask register (OTG_FS_HCINTMSK0)

Offset: 0x10C, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ0

OTG_FS host channel-0 transfer size register

Offset: 0x110, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR1

OTG_FS host channel-1 characteristics register (OTG_FS_HCCHAR1)

Offset: 0x120, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT1

OTG_FS host channel-1 interrupt register (OTG_FS_HCINT1)

Offset: 0x128, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK1

OTG_FS host channel-1 mask register (OTG_FS_HCINTMSK1)

Offset: 0x12C, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ1

OTG_FS host channel-1 transfer size register

Offset: 0x130, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR2

OTG_FS host channel-2 characteristics register (OTG_FS_HCCHAR2)

Offset: 0x140, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT2

OTG_FS host channel-2 interrupt register (OTG_FS_HCINT2)

Offset: 0x148, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK2

OTG_FS host channel-2 mask register (OTG_FS_HCINTMSK2)

Offset: 0x14C, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ2

OTG_FS host channel-2 transfer size register

Offset: 0x150, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR3

OTG_FS host channel-3 characteristics register (OTG_FS_HCCHAR3)

Offset: 0x160, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT3

OTG_FS host channel-3 interrupt register (OTG_FS_HCINT3)

Offset: 0x168, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK3

OTG_FS host channel-3 mask register (OTG_FS_HCINTMSK3)

Offset: 0x16C, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ3

OTG_FS host channel-3 transfer size register

Offset: 0x170, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR4

OTG_FS host channel-4 characteristics register (OTG_FS_HCCHAR4)

Offset: 0x180, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT4

OTG_FS host channel-4 interrupt register (OTG_FS_HCINT4)

Offset: 0x188, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK4

OTG_FS host channel-4 mask register (OTG_FS_HCINTMSK4)

Offset: 0x18C, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ4

OTG_FS host channel-x transfer size register

Offset: 0x190, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR5

OTG_FS host channel-5 characteristics register (OTG_FS_HCCHAR5)

Offset: 0x1A0, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT5

OTG_FS host channel-5 interrupt register (OTG_FS_HCINT5)

Offset: 0x1A8, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK5

OTG_FS host channel-5 mask register (OTG_FS_HCINTMSK5)

Offset: 0x1AC, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ5

OTG_FS host channel-5 transfer size register

Offset: 0x1B0, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR6

OTG_FS host channel-6 characteristics register (OTG_FS_HCCHAR6)

Offset: 0x1C0, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT6

OTG_FS host channel-6 interrupt register (OTG_FS_HCINT6)

Offset: 0x1C8, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK6

OTG_FS host channel-6 mask register (OTG_FS_HCINTMSK6)

Offset: 0x1CC, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ6

OTG_FS host channel-6 transfer size register

Offset: 0x1D0, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

HCCHAR7

OTG_FS host channel-7 characteristics register (OTG_FS_HCCHAR7)

Offset: 0x1E0, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CHENA
rw 		CHDIS
rw 		ODDFRM
rw 		DAD
rw 		MCNT
rw 		EPTYP
rw 		LSDEV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EPDIR
rw 		EPNUM
rw 		MPSIZ
rw
Toggle Fields.

MPSIZ

Bits 0-10: Maximum packet size.

EPNUM

Bits 11-14: Endpoint number.

EPDIR

Bit 15: Endpoint direction.

LSDEV

Bit 17: Low-speed device.

EPTYP

Bits 18-19: Endpoint type.

MCNT

Bits 20-21: Multicount.

DAD

Bits 22-28: Device address.

ODDFRM

Bit 29: Odd frame.

CHDIS

Bit 30: Channel disable.

CHENA

Bit 31: Channel enable.

HCINT7

OTG_FS host channel-7 interrupt register (OTG_FS_HCINT7)

Offset: 0x1E8, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERR
rw 		FRMOR
rw 		BBERR
rw 		TXERR
rw 		ACK
rw 		NAK
rw 		STALL
rw 		CHH
rw 		XFRC
rw
Toggle Fields.

XFRC

Bit 0: Transfer completed.

CHH

Bit 1: Channel halted.

STALL

Bit 3: STALL response received interrupt.

NAK

Bit 4: NAK response received interrupt.

ACK

Bit 5: ACK response received/transmitted interrupt.

TXERR

Bit 7: Transaction error.

BBERR

Bit 8: Babble error.

FRMOR

Bit 9: Frame overrun.

DTERR

Bit 10: Data toggle error.

HCINTMSK7

OTG_FS host channel-7 mask register (OTG_FS_HCINTMSK7)

Offset: 0x1EC, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DTERRM
rw 		FRMORM
rw 		BBERRM
rw 		TXERRM
rw 		NYET
rw 		ACKM
rw 		NAKM
rw 		STALLM
rw 		CHHM
rw 		XFRCM
rw
Toggle Fields.

XFRCM

Bit 0: Transfer completed mask.

CHHM

Bit 1: Channel halted mask.

STALLM

Bit 3: STALL response received interrupt mask.

NAKM

Bit 4: NAK response received interrupt mask.

ACKM

Bit 5: ACK response received/transmitted interrupt mask.

NYET

Bit 6: response received interrupt mask.

TXERRM

Bit 7: Transaction error mask.

BBERRM

Bit 8: Babble error mask.

FRMORM

Bit 9: Frame overrun mask.

DTERRM

Bit 10: Data toggle error mask.

HCTSIZ7

OTG_FS host channel-7 transfer size register

Offset: 0x1F0, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DPID
rw 		PKTCNT
rw 		XFRSIZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
XFRSIZ
rw
Toggle Fields.

XFRSIZ

Bits 0-18: Transfer size.

PKTCNT

Bits 19-28: Packet count.

DPID

Bits 29-30: Data PID.

OTG_FS_PWRCLK

0x50000E00: USB on the go full speed

0/3 fields covered. Toggle Registers.

PCGCCTL

OTG_FS power and clock gating control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PHYSUSP
rw 		GATEHCLK
rw 		STPPCLK
rw
Toggle Fields.

STPPCLK

Bit 0: Stop PHY clock.

GATEHCLK

Bit 1: Gate HCLK.

PHYSUSP

Bit 4: PHY Suspended.

PWR

0x40007000: Power control

4/17 fields covered. Toggle Registers.

CR

power control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VOS
rw 		ADCDC1
rw 		FPDS
rw 		DBP
rw 		PLS
rw 		PVDE
rw 		CSBF
rw 		CWUF
rw 		PDDS
rw 		LPDS
rw
Toggle Fields.

LPDS

Bit 0: Low-power deep sleep.

PDDS

Bit 1: Power down deepsleep.

CWUF

Bit 2: Clear wakeup flag.

CSBF

Bit 3: Clear standby flag.

PVDE

Bit 4: Power voltage detector enable.

PLS

Bits 5-7: PVD level selection.

DBP

Bit 8: Disable backup domain write protection.

FPDS

Bit 9: Flash power down in Stop mode.

ADCDC1

Bit 13: ADCDC1.

VOS

Bits 14-15: Regulator voltage scaling output selection.

CSR

power control/status register

Offset: 0x4, reset: 0x00000000, access: Unspecified

4/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VOSRDY
rw 		BRE
rw 		EWUP
rw 		BRR
r 		PVDO
r 		SBF
r 		WUF
r
Toggle Fields.

WUF

Bit 0: Wakeup flag.

SBF

Bit 1: Standby flag.

PVDO

Bit 2: PVD output.

BRR

Bit 3: Backup regulator ready.

EWUP

Bit 8: Enable WKUP pin.

BRE

Bit 9: Backup regulator enable.

VOSRDY

Bit 14: Regulator voltage scaling output selection ready bit.

RCC

0x40023800: Reset and clock control

172/172 fields covered. Toggle Registers.

CR

clock control register

Offset: 0x0, reset: 0x00000083, access: Unspecified

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLI2SRDY
r 		PLLI2SON
rw 		PLLRDY
r 		PLLON
rw 		CSSON
rw 		HSEBYP
rw 		HSERDY
r 		HSEON
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HSICAL
r 		HSITRIM
rw 		HSIRDY
r 		HSION
rw
Toggle Fields.

HSION

Bit 0: Internal high-speed clock enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

HSIRDY

Bit 1: Internal high-speed clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

HSITRIM

Bits 3-7: Internal high-speed clock trimming.

Allowed values: 0-31

HSICAL

Bits 8-15: Internal high-speed clock calibration.

Allowed values: 0-255

HSEON

Bit 16: HSE clock enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

HSERDY

Bit 17: HSE clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

HSEBYP

Bit 18: HSE clock bypass.

Allowed values:
0: NotBypassed: HSE crystal oscillator not bypassed
1: Bypassed: HSE crystal oscillator bypassed with external clock

CSSON

Bit 19: Clock security system enable.

Allowed values:
0: Off: Clock security system disabled (clock detector OFF)
1: On: Clock security system enable (clock detector ON if the HSE is ready, OFF if not)

PLLON

Bit 24: Main PLL (PLL) enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

PLLRDY

Bit 25: Main PLL (PLL) clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

PLLI2SON

Bit 26: PLLI2S enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

PLLI2SRDY

Bit 27: PLLI2S clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

PLLCFGR

PLL configuration register

Offset: 0x4, reset: 0x24003010, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLQ
rw 		PLLSRC
rw 		PLLP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PLLN
rw 		PLLM
rw
Toggle Fields.

PLLM

Bits 0-5: Division factor for the main PLL (PLL) and audio PLL (PLLI2S) input clock.

Allowed values: 2-63

PLLN

Bits 6-14: Main PLL (PLL) multiplication factor for VCO.

Allowed values: 50-432

PLLP

Bits 16-17: Main PLL (PLL) division factor for main system clock.

Allowed values:
0: Div2: PLLP=2
1: Div4: PLLP=4
2: Div6: PLLP=6
3: Div8: PLLP=8

PLLSRC

Bit 22: Main PLL(PLL) and audio PLL (PLLI2S) entry clock source.

Allowed values:
0: HSI: HSI clock selected as PLL and PLLI2S clock entry
1: HSE: HSE oscillator clock selected as PLL and PLLI2S clock entry

PLLQ

Bits 24-27: Main PLL (PLL) division factor for USB OTG FS, SDIO and random number generator clocks.

Allowed values: 2-15

CFGR

clock configuration register

Offset: 0x8, reset: 0x00000000, access: Unspecified

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MCO2
rw 		MCO2PRE
rw 		MCO1PRE
rw 		I2SSRC
rw 		MCO1
rw 		RTCPRE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PPRE2
rw 		PPRE1
rw 		HPRE
rw 		SWS
N/A 		SW
N/A
Toggle Fields.

SW

Bits 0-1: System clock switch.

Allowed values:
0: HSI: HSI selected as system clock
1: HSE: HSE selected as system clock
2: PLL: PLL selected as system clock

SWS

Bits 2-3: System clock switch status.

Allowed values:
0: HSI: HSE oscillator used as system clock
1: HSE: HSI oscillator used as system clock
2: PLL: PLL used as system clock

HPRE

Bits 4-7: AHB prescaler.

Allowed values:
0: Div1: SYSCLK not divided
8: Div2: SYSCLK divided by 2
9: Div4: SYSCLK divided by 4
10: Div8: SYSCLK divided by 8
11: Div16: SYSCLK divided by 16
12: Div64: SYSCLK divided by 64
13: Div128: SYSCLK divided by 128
14: Div256: SYSCLK divided by 256
15: Div512: SYSCLK divided by 512

PPRE1

Bits 10-12: APB Low speed prescaler (APB1).

Allowed values:
0: Div1: HCLK not divided
4: Div2: HCLK divided by 2
5: Div4: HCLK divided by 4
6: Div8: HCLK divided by 8
7: Div16: HCLK divided by 16

PPRE2

Bits 13-15: APB high-speed prescaler (APB2).

Allowed values:
0: Div1: HCLK not divided
4: Div2: HCLK divided by 2
5: Div4: HCLK divided by 4
6: Div8: HCLK divided by 8
7: Div16: HCLK divided by 16

RTCPRE

Bits 16-20: HSE division factor for RTC clock.

Allowed values: 0-31

MCO1

Bits 21-22: Microcontroller clock output 1.

Allowed values:
0: HSI: HSI clock selected
1: LSE: LSE oscillator selected
2: HSE: HSE oscillator clock selected
3: PLL: PLL clock selected

I2SSRC

Bit 23: I2S clock selection.

Allowed values:
0: PLLI2S: PLLI2S clock used as I2S clock source
1: CKIN: External clock mapped on the I2S_CKIN pin used as I2S clock source

MCO1PRE

Bits 24-26: MCO1 prescaler.

Allowed values:
0: Div1: No division
4: Div2: Division by 2
5: Div3: Division by 3
6: Div4: Division by 4
7: Div5: Division by 5

MCO2PRE

Bits 27-29: MCO2 prescaler.

Allowed values:
0: Div1: No division
4: Div2: Division by 2
5: Div3: Division by 3
6: Div4: Division by 4
7: Div5: Division by 5

MCO2

Bits 30-31: Microcontroller clock output 2.

Allowed values:
0: SYSCLK: System clock (SYSCLK) selected
1: PLLI2S: PLLI2S clock selected
2: HSE: HSE oscillator clock selected
3: PLL: PLL clock selected

CIR

clock interrupt register

Offset: 0xC, reset: 0x00000000, access: Unspecified

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CSSC
w 		PLLI2SRDYC
w 		PLLRDYC
w 		HSERDYC
w 		HSIRDYC
w 		LSERDYC
w 		LSIRDYC
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PLLI2SRDYIE
rw 		PLLRDYIE
rw 		HSERDYIE
rw 		HSIRDYIE
rw 		LSERDYIE
rw 		LSIRDYIE
rw 		CSSF
r 		PLLI2SRDYF
r 		PLLRDYF
r 		HSERDYF
r 		HSIRDYF
r 		LSERDYF
r 		LSIRDYF
r
Toggle Fields.

LSIRDYF

Bit 0: LSI ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

LSERDYF

Bit 1: LSE ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSIRDYF

Bit 2: HSI ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSERDYF

Bit 3: HSE ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

PLLRDYF

Bit 4: Main PLL (PLL) ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

PLLI2SRDYF

Bit 5: PLLI2S ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

CSSF

Bit 7: Clock security system interrupt flag.

Allowed values:
0: NotInterrupted: No clock security interrupt caused by HSE clock failure
1: Interrupted: Clock security interrupt caused by HSE clock failure

LSIRDYIE

Bit 8: LSI ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

LSERDYIE

Bit 9: LSE ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSIRDYIE

Bit 10: HSI ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSERDYIE

Bit 11: HSE ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

PLLRDYIE

Bit 12: Main PLL (PLL) ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

PLLI2SRDYIE

Bit 13: PLLI2S ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

LSIRDYC

Bit 16: LSI ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

LSERDYC

Bit 17: LSE ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

HSIRDYC

Bit 18: HSI ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

HSERDYC

Bit 19: HSE ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

PLLRDYC

Bit 20: Main PLL(PLL) ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

PLLI2SRDYC

Bit 21: PLLI2S ready interrupt clear.

Allowed values:
1: Clear: Clear interrupt flag

CSSC

Bit 23: Clock security system interrupt clear.

Allowed values:
1: Clear: Clear CSSF flag

AHB1RSTR

AHB1 peripheral reset register

Offset: 0x10, reset: 0x00000000, access: read-write

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DMA2RST
rw 		DMA1RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCRST
rw 		GPIOHRST
rw 		GPIOERST
rw 		GPIODRST
rw 		GPIOCRST
rw 		GPIOBRST
rw 		GPIOARST
rw
Toggle Fields.

GPIOARST

Bit 0: IO port A reset.

Allowed values:
1: Reset: Reset the selected module

GPIOBRST

Bit 1: IO port B reset.

Allowed values:
1: Reset: Reset the selected module

GPIOCRST

Bit 2: IO port C reset.

Allowed values:
1: Reset: Reset the selected module

GPIODRST

Bit 3: IO port D reset.

Allowed values:
1: Reset: Reset the selected module

GPIOERST

Bit 4: IO port E reset.

Allowed values:
1: Reset: Reset the selected module

GPIOHRST

Bit 7: IO port H reset.

Allowed values:
1: Reset: Reset the selected module

CRCRST

Bit 12: CRC reset.

Allowed values:
1: Reset: Reset the selected module

DMA1RST

Bit 21: DMA2 reset.

Allowed values:
1: Reset: Reset the selected module

DMA2RST

Bit 22: DMA2 reset.

Allowed values:
1: Reset: Reset the selected module

AHB2RSTR

AHB2 peripheral reset register

Offset: 0x14, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OTGFSRST
rw
Toggle Fields.

OTGFSRST

Bit 7: USB OTG FS module reset.

Allowed values:
1: Reset: Reset the selected module

APB1RSTR

APB1 peripheral reset register

Offset: 0x20, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PWRRST
rw 		I2C3RST
rw 		I2C2RST
rw 		I2C1RST
rw 		UART2RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI3RST
rw 		SPI2RST
rw 		WWDGRST
rw 		TIM5RST
rw 		TIM4RST
rw 		TIM3RST
rw 		TIM2RST
rw
Toggle Fields.

TIM2RST

Bit 0: TIM2 reset.

Allowed values:
1: Reset: Reset the selected module

TIM3RST

Bit 1: TIM3 reset.

Allowed values:
1: Reset: Reset the selected module

TIM4RST

Bit 2: TIM4 reset.

Allowed values:
1: Reset: Reset the selected module

TIM5RST

Bit 3: TIM5 reset.

Allowed values:
1: Reset: Reset the selected module

WWDGRST

Bit 11: Window watchdog reset.

Allowed values:
1: Reset: Reset the selected module

SPI2RST

Bit 14: SPI 2 reset.

Allowed values:
1: Reset: Reset the selected module

SPI3RST

Bit 15: SPI 3 reset.

Allowed values:
1: Reset: Reset the selected module

UART2RST

Bit 17: USART 2 reset.

Allowed values:
1: Reset: Reset the selected module

I2C1RST

Bit 21: I2C 1 reset.

Allowed values:
1: Reset: Reset the selected module

I2C2RST

Bit 22: I2C 2 reset.

Allowed values:
1: Reset: Reset the selected module

I2C3RST

Bit 23: I2C3 reset.

Allowed values:
1: Reset: Reset the selected module

PWRRST

Bit 28: Power interface reset.

Allowed values:
1: Reset: Reset the selected module

APB2RSTR

APB2 peripheral reset register

Offset: 0x24, reset: 0x00000000, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIM11RST
rw 		TIM10RST
rw 		TIM9RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SYSCFGRST
rw 		SPI4RST
rw 		SPI1RST
rw 		SDIORST
rw 		ADCRST
rw 		USART6RST
rw 		USART1RST
rw 		TIM1RST
rw
Toggle Fields.

TIM1RST

Bit 0: TIM1 reset.

Allowed values:
1: Reset: Reset the selected module

USART1RST

Bit 4: USART1 reset.

Allowed values:
1: Reset: Reset the selected module

USART6RST

Bit 5: USART6 reset.

Allowed values:
1: Reset: Reset the selected module

ADCRST

Bit 8: ADC interface reset (common to all ADCs).

Allowed values:
1: Reset: Reset the selected module

SDIORST

Bit 11: SDIO reset.

Allowed values:
1: Reset: Reset the selected module

SPI1RST

Bit 12: SPI 1 reset.

Allowed values:
1: Reset: Reset the selected module

SPI4RST

Bit 13: SPI4 reset.

Allowed values:
1: Reset: Reset the selected module

SYSCFGRST

Bit 14: System configuration controller reset.

Allowed values:
1: Reset: Reset the selected module

TIM9RST

Bit 16: TIM9 reset.

Allowed values:
1: Reset: Reset the selected module

TIM10RST

Bit 17: TIM10 reset.

Allowed values:
1: Reset: Reset the selected module

TIM11RST

Bit 18: TIM11 reset.

Allowed values:
1: Reset: Reset the selected module

AHB1ENR

AHB1 peripheral clock register

Offset: 0x30, reset: 0x00100000, access: read-write

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DMA2EN
rw 		DMA1EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCEN
rw 		GPIOHEN
rw 		GPIOEEN
rw 		GPIODEN
rw 		GPIOCEN
rw 		GPIOBEN
rw 		GPIOAEN
rw
Toggle Fields.

GPIOAEN

Bit 0: IO port A clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

GPIOBEN

Bit 1: IO port B clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

GPIOCEN

Bit 2: IO port C clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

GPIODEN

Bit 3: IO port D clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

GPIOEEN

Bit 4: IO port E clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

GPIOHEN

Bit 7: IO port H clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CRCEN

Bit 12: CRC clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DMA1EN

Bit 21: DMA1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DMA2EN

Bit 22: DMA2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

AHB2ENR

AHB2 peripheral clock enable register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OTGFSEN
rw
Toggle Fields.

OTGFSEN

Bit 7: USB OTG FS clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB1ENR

APB1 peripheral clock enable register

Offset: 0x40, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PWREN
rw 		I2C3EN
rw 		I2C2EN
rw 		I2C1EN
rw 		USART2EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI3EN
rw 		SPI2EN
rw 		WWDGEN
rw 		TIM5EN
rw 		TIM4EN
rw 		TIM3EN
rw 		TIM2EN
rw
Toggle Fields.

TIM2EN

Bit 0: TIM2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM3EN

Bit 1: TIM3 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM4EN

Bit 2: TIM4 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM5EN

Bit 3: TIM5 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

WWDGEN

Bit 11: Window watchdog clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI2EN

Bit 14: SPI2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI3EN

Bit 15: SPI3 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART2EN

Bit 17: USART 2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C1EN

Bit 21: I2C1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C2EN

Bit 22: I2C2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C3EN

Bit 23: I2C3 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PWREN

Bit 28: Power interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB2ENR

APB2 peripheral clock enable register

Offset: 0x44, reset: 0x00000000, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIM11EN
rw 		TIM10EN
rw 		TIM9EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SYSCFGEN
rw 		SPI4EN
rw 		SPI1EN
rw 		SDIOEN
rw 		ADC1EN
rw 		USART6EN
rw 		USART1EN
rw 		TIM1EN
rw
Toggle Fields.

TIM1EN

Bit 0: TIM1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART1EN

Bit 4: USART1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART6EN

Bit 5: USART6 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

ADC1EN

Bit 8: ADC1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SDIOEN

Bit 11: SDIO clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI1EN

Bit 12: SPI1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI4EN

Bit 13: SPI4 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SYSCFGEN

Bit 14: System configuration controller clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM9EN

Bit 16: TIM9 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM10EN

Bit 17: TIM10 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM11EN

Bit 18: TIM11 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

AHB1LPENR

AHB1 peripheral clock enable in low power mode register

Offset: 0x50, reset: 0x7E6791FF, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DMA2LPEN
rw 		DMA1LPEN
rw 		SRAM1LPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FLITFLPEN
rw 		CRCLPEN
rw 		GPIOHLPEN
rw 		GPIOELPEN
rw 		GPIODLPEN
rw 		GPIOCLPEN
rw 		GPIOBLPEN
rw 		GPIOALPEN
rw
Toggle Fields.

GPIOALPEN

Bit 0: IO port A clock enable during sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

GPIOBLPEN

Bit 1: IO port B clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

GPIOCLPEN

Bit 2: IO port C clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

GPIODLPEN

Bit 3: IO port D clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

GPIOELPEN

Bit 4: IO port E clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

GPIOHLPEN

Bit 7: IO port H clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

CRCLPEN

Bit 12: CRC clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

FLITFLPEN

Bit 15: Flash interface clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SRAM1LPEN

Bit 16: SRAM 1interface clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

DMA1LPEN

Bit 21: DMA1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

DMA2LPEN

Bit 22: DMA2 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

AHB2LPENR

AHB2 peripheral clock enable in low power mode register

Offset: 0x54, reset: 0x000000F1, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OTGFSLPEN
rw
Toggle Fields.

OTGFSLPEN

Bit 7: USB OTG FS clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

APB1LPENR

APB1 peripheral clock enable in low power mode register

Offset: 0x60, reset: 0x36FEC9FF, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PWRLPEN
rw 		I2C3LPEN
rw 		I2C2LPEN
rw 		I2C1LPEN
rw 		USART2LPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI3LPEN
rw 		SPI2LPEN
rw 		WWDGLPEN
rw 		TIM5LPEN
rw 		TIM4LPEN
rw 		TIM3LPEN
rw 		TIM2LPEN
rw
Toggle Fields.

TIM2LPEN

Bit 0: TIM2 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM3LPEN

Bit 1: TIM3 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM4LPEN

Bit 2: TIM4 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM5LPEN

Bit 3: TIM5 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

WWDGLPEN

Bit 11: Window watchdog clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SPI2LPEN

Bit 14: SPI2 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SPI3LPEN

Bit 15: SPI3 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

USART2LPEN

Bit 17: USART2 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

I2C1LPEN

Bit 21: I2C1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

I2C2LPEN

Bit 22: I2C2 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

I2C3LPEN

Bit 23: I2C3 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

PWRLPEN

Bit 28: Power interface clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

APB2LPENR

APB2 peripheral clock enabled in low power mode register

Offset: 0x64, reset: 0x00075F33, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIM11LPEN
rw 		TIM10LPEN
rw 		TIM9LPEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SYSCFGLPEN
rw 		SPI4LPEN
rw 		SPI1LPEN
rw 		SDIOLPEN
rw 		ADC1LPEN
rw 		USART6LPEN
rw 		USART1LPEN
rw 		TIM1LPEN
rw
Toggle Fields.

TIM1LPEN

Bit 0: TIM1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

USART1LPEN

Bit 4: USART1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

USART6LPEN

Bit 5: USART6 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

ADC1LPEN

Bit 8: ADC1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SDIOLPEN

Bit 11: SDIO clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SPI1LPEN

Bit 12: SPI 1 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SPI4LPEN

Bit 13: SPI4 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

SYSCFGLPEN

Bit 14: System configuration controller clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM9LPEN

Bit 16: TIM9 clock enable during sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM10LPEN

Bit 17: TIM10 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

TIM11LPEN

Bit 18: TIM11 clock enable during Sleep mode.

Allowed values:
0: DisabledInSleep: Selected module is disabled during Sleep mode
1: EnabledInSleep: Selected module is enabled during Sleep mode

BDCR

Backup domain control register

Offset: 0x70, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BDRST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTCEN
rw 		RTCSEL
N/A 		LSEBYP
rw 		LSERDY
r 		LSEON
rw
Toggle Fields.

LSEON

Bit 0: External low-speed oscillator enable.

Allowed values:
0: Off: LSE oscillator Off
1: On: LSE oscillator On

LSERDY

Bit 1: External low-speed oscillator ready.

Allowed values:
0: NotReady: LSE oscillator not ready
1: Ready: LSE oscillator ready

LSEBYP

Bit 2: External low-speed oscillator bypass.

Allowed values:
0: NotBypassed: LSE crystal oscillator not bypassed
1: Bypassed: LSE crystal oscillator bypassed with external clock

RTCSEL

Bits 8-9: RTC clock source selection.

Allowed values:
0: NoClock: No clock
1: LSE: LSE oscillator clock used as RTC clock
2: LSI: LSI oscillator clock used as RTC clock
3: HSE: HSE oscillator clock divided by a prescaler used as RTC clock

RTCEN

Bit 15: RTC clock enable.

Allowed values:
0: Disabled: RTC clock disabled
1: Enabled: RTC clock enabled

BDRST

Bit 16: Backup domain software reset.

Allowed values:
0: Disabled: Reset not activated
1: Enabled: Reset the entire RTC domain

CSR

clock control & status register

Offset: 0x74, reset: 0x0E000000, access: Unspecified

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPWRRSTF
rw 		WWDGRSTF
rw 		WDGRSTF
rw 		SFTRSTF
rw 		PORRSTF
rw 		PADRSTF
rw 		BORRSTF
rw 		RMVF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LSIRDY
r 		LSION
rw
Toggle Fields.

LSION

Bit 0: Internal low-speed oscillator enable.

Allowed values:
0: Off: LSI oscillator Off
1: On: LSI oscillator On

LSIRDY

Bit 1: Internal low-speed oscillator ready.

Allowed values:
0: NotReady: LSI oscillator not ready
1: Ready: LSI oscillator ready

RMVF

Bit 24: Remove reset flag.

Allowed values:
1: Clear: Clears the reset flag

BORRSTF

Bit 25: BOR reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

PADRSTF

Bit 26: PIN reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

PORRSTF

Bit 27: POR/PDR reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

SFTRSTF

Bit 28: Software reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

WDGRSTF

Bit 29: Independent watchdog reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

WWDGRSTF

Bit 30: Window watchdog reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

LPWRRSTF

Bit 31: Low-power reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

SSCGR

spread spectrum clock generation register

Offset: 0x80, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SSCGEN
rw 		SPREADSEL
rw 		INCSTEP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INCSTEP
rw 		MODPER
rw
Toggle Fields.

MODPER

Bits 0-12: Modulation period.

Allowed values: 0-8191

INCSTEP

Bits 13-27: Incrementation step.

Allowed values: 0-32767

SPREADSEL

Bit 30: Spread Select.

Allowed values:
0: Center: Center spread
1: Down: Down spread

SSCGEN

Bit 31: Spread spectrum modulation enable.

Allowed values:
0: Disabled: Spread spectrum modulation disabled
1: Enabled: Spread spectrum modulation enabled

PLLI2SCFGR

PLLI2S configuration register

Offset: 0x84, reset: 0x20003000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLI2SR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PLLI2SN
rw
Toggle Fields.

PLLI2SN

Bits 6-14: PLLI2S multiplication factor for VCO.

Allowed values: 50-432

PLLI2SR

Bits 28-30: PLLI2S division factor for I2S clocks.

Allowed values: 2-7

DCKCFGR

RCC Dedicated Clock Configuration Register

Offset: 0x140, reset: 0, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIMPRE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

TIMPRE

Bit 24: Timers clocks prescalers selection.

Allowed values:
0: Mul2: If the APB prescaler is configured 1, TIMxCLK = PCLKx. Otherwise, TIMxCLK = 2xPCLKx
1: Mul4: If the APB prescaler is configured 1, 2 or 4, TIMxCLK = HCLK. Otherwise, TIMxCLK = 4xPCLKx

RTC

0x40002800: Real-time clock

107/123 fields covered. Toggle Registers.

TR

time register

Offset: 0x0, reset: 0x00000000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
rw 		MNU
rw 		ST
rw 		SU
rw
Toggle Fields.

SU

Bits 0-3: Second units in BCD format.

Allowed values: 0-15

ST

Bits 4-6: Second tens in BCD format.

Allowed values: 0-7

MNU

Bits 8-11: Minute units in BCD format.

Allowed values: 0-15

MNT

Bits 12-14: Minute tens in BCD format.

Allowed values: 0-7

HU

Bits 16-19: Hour units in BCD format.

Allowed values: 0-15

HT

Bits 20-21: Hour tens in BCD format.

Allowed values: 0-3

PM

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

DR

date register

Offset: 0x4, reset: 0x00002101, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
YT
rw 		YU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDU
rw 		MT
rw 		MU
rw 		DT
rw 		DU
rw
Toggle Fields.

DU

Bits 0-3: Date units in BCD format.

Allowed values: 0-15

DT

Bits 4-5: Date tens in BCD format.

Allowed values: 0-3

MU

Bits 8-11: Month units in BCD format.

Allowed values: 0-15

MT

Bit 12: Month tens in BCD format.

Allowed values: 0-1

WDU

Bits 13-15: Week day units.

Allowed values: 1-7

YU

Bits 16-19: Year units in BCD format.

Allowed values: 0-15

YT

Bits 20-23: Year tens in BCD format.

Allowed values: 0-15

CR

control register

Offset: 0x8, reset: 0x00000000, access: read-write

20/21 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
COE
rw 		OSEL
rw 		POL
rw 		COSEL
rw 		BKP
rw 		SUB1H
rw 		ADD1H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSIE
rw 		WUTIE
rw 		ALRBIE
rw 		ALRAIE
rw 		TSE
rw 		WUTE
rw 		ALRBE
rw 		ALRAE
rw 		DCE
rw 		FMT
rw 		BYPSHAD
rw 		REFCKON
rw 		TSEDGE
rw 		WUCKSEL
rw
Toggle Fields.

WUCKSEL

Bits 0-2: Wakeup clock selection.

Allowed values:
0: Div16: RTC/16 clock is selected
1: Div8: RTC/8 clock is selected
2: Div4: RTC/4 clock is selected
3: Div2: RTC/2 clock is selected
4: ClockSpare: ck_spre (usually 1 Hz) clock is selected
6: ClockSpareWithOffset: ck_spre (usually 1 Hz) clock is selected and 2^16 is added to the WUT counter value

TSEDGE

Bit 3: Time-stamp event active edge.

Allowed values:
0: RisingEdge: RTC_TS input rising edge generates a time-stamp event
1: FallingEdge: RTC_TS input falling edge generates a time-stamp event

REFCKON

Bit 4: Reference clock detection enable (50 or 60 Hz).

Allowed values:
0: Disabled: RTC_REFIN detection disabled
1: Enabled: RTC_REFIN detection enabled

BYPSHAD

Bit 5: Bypass the shadow registers.

Allowed values:
0: ShadowReg: Calendar values (when reading from RTC_SSR, RTC_TR, and RTC_DR) are taken from the shadow registers, which are updated once every two RTCCLK cycles
1: BypassShadowReg: Calendar values (when reading from RTC_SSR, RTC_TR, and RTC_DR) are taken directly from the calendar counters

FMT

Bit 6: Hour format.

Allowed values:
0: Twenty_Four_Hour: 24 hour/day format
1: AM_PM: AM/PM hour format

DCE

Bit 7: Coarse digital calibration enable.

ALRAE

Bit 8: Alarm A enable.

Allowed values:
0: Disabled: Alarm A disabled
1: Enabled: Alarm A enabled

ALRBE

Bit 9: Alarm B enable.

Allowed values:
0: Disabled: Alarm B disabled
1: Enabled: Alarm B enabled

WUTE

Bit 10: Wakeup timer enable.

Allowed values:
0: Disabled: Wakeup timer disabled
1: Enabled: Wakeup timer enabled

TSE

Bit 11: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

ALRAIE

Bit 12: Alarm A interrupt enable.

Allowed values:
0: Disabled: Alarm A interrupt disabled
1: Enabled: Alarm A interrupt enabled

ALRBIE

Bit 13: Alarm B interrupt enable.

Allowed values:
0: Disabled: Alarm B Interrupt disabled
1: Enabled: Alarm B Interrupt enabled

WUTIE

Bit 14: Wakeup timer interrupt enable.

Allowed values:
0: Disabled: Wakeup timer interrupt disabled
1: Enabled: Wakeup timer interrupt enabled

TSIE

Bit 15: Time-stamp interrupt enable.

Allowed values:
0: Disabled: Time-stamp Interrupt disabled
1: Enabled: Time-stamp Interrupt enabled

ADD1H

Bit 16: Add 1 hour (summer time change).

Allowed values:
1: Add1: Adds 1 hour to the current time. This can be used for summer time change outside initialization mode

SUB1H

Bit 17: Subtract 1 hour (winter time change).

Allowed values:
1: Sub1: Subtracts 1 hour to the current time. This can be used for winter time change outside initialization mode

BKP

Bit 18: Backup.

Allowed values:
0: DST_Not_Changed: Daylight Saving Time change has not been performed
1: DST_Changed: Daylight Saving Time change has been performed

COSEL

Bit 19: Calibration Output selection.

Allowed values:
0: CalFreq_512Hz: Calibration output is 512 Hz (with default prescaler setting)
1: CalFreq_1Hz: Calibration output is 1 Hz (with default prescaler setting)

POL

Bit 20: Output polarity.

Allowed values:
0: High: The pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL[1:0])
1: Low: The pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL[1:0])

OSEL

Bits 21-22: Output selection.

Allowed values:
0: Disabled: Output disabled
1: AlarmA: Alarm A output enabled
2: AlarmB: Alarm B output enabled
3: Wakeup: Wakeup output enabled

COE

Bit 23: Calibration output enable.

Allowed values:
0: Disabled: Calibration output disabled
1: Enabled: Calibration output enabled

ISR

initialization and status register

Offset: 0xC, reset: 0x00000007, access: Unspecified

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RECALPF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMP2F
rw 		TAMP1F
rw 		TSOVF
rw 		TSF
rw 		WUTF
rw 		ALRBF
rw 		ALRAF
rw 		INIT
rw 		INITF
r 		RSF
rw 		INITS
r 		SHPF
rw 		WUTWF
r 		ALRBWF
r 		ALRAWF
r
Toggle Fields.

ALRAWF

Bit 0: Alarm A write flag.

Allowed values:
0: UpdateNotAllowed: Alarm update not allowed
1: UpdateAllowed: Alarm update allowed

ALRBWF

Bit 1: Alarm B write flag.

Allowed values:
0: UpdateNotAllowed: Alarm update not allowed
1: UpdateAllowed: Alarm update allowed

WUTWF

Bit 2: Wakeup timer write flag.

Allowed values:
0: UpdateNotAllowed: Wakeup timer configuration update not allowed
1: UpdateAllowed: Wakeup timer configuration update allowed

SHPF

Bit 3: Shift operation pending.

Allowed values:
0: NoShiftPending: No shift operation is pending
1: ShiftPending: A shift operation is pending

INITS

Bit 4: Initialization status flag.

Allowed values:
0: NotInitalized: Calendar has not been initialized
1: Initalized: Calendar has been initialized

RSF

Bit 5: Registers synchronization flag.

Allowed values:
0: NotSynced: Calendar shadow registers not yet synchronized
1: Synced: Calendar shadow registers synchronized

INITF

Bit 6: Initialization flag.

Allowed values:
0: NotAllowed: Calendar registers update is not allowed
1: Allowed: Calendar registers update is allowed

INIT

Bit 7: Initialization mode.

Allowed values:
0: FreeRunningMode: Free running mode
1: InitMode: Initialization mode used to program time and date register (RTC_TR and RTC_DR), and prescaler register (RTC_PRER). Counters are stopped and start counting from the new value when INIT is reset.

ALRAF

Bit 8: Alarm A flag.

Allowed values:
1: Match: This flag is set by hardware when the time/date registers (RTC_TR and RTC_DR) match the Alarm A register (RTC_ALRMAR)

ALRBF

Bit 9: Alarm B flag.

Allowed values:
1: Match: This flag is set by hardware when the time/date registers (RTC_TR and RTC_DR) match the Alarm B register (RTC_ALRMBR)

WUTF

Bit 10: Wakeup timer flag.

Allowed values:
1: Zero: This flag is set by hardware when the wakeup auto-reload counter reaches 0

TSF

Bit 11: Time-stamp flag.

Allowed values:
1: TimestampEvent: This flag is set by hardware when a time-stamp event occurs

TSOVF

Bit 12: Time-stamp overflow flag.

Allowed values:
1: Overflow: This flag is set by hardware when a time-stamp event occurs while TSF is already set

TAMP1F

Bit 13: Tamper detection flag.

Allowed values:
1: Tampered: This flag is set by hardware when a tamper detection event is detected on the RTC_TAMPx input

TAMP2F

Bit 14: TAMPER2 detection flag.

Allowed values:
1: Tampered: This flag is set by hardware when a tamper detection event is detected on the RTC_TAMPx input

RECALPF

Bit 16: Recalibration pending Flag.

Allowed values:
1: Pending: The RECALPF status flag is automatically set to 1 when software writes to the RTC_CALR register, indicating that the RTC_CALR register is blocked. When the new calibration settings are taken into account, this bit returns to 0

PRER

prescaler register

Offset: 0x10, reset: 0x007F00FF, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PREDIV_A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PREDIV_S
rw
Toggle Fields.

PREDIV_S

Bits 0-14: Synchronous prescaler factor.

Allowed values: 0-32767

PREDIV_A

Bits 16-22: Asynchronous prescaler factor.

Allowed values: 0-127

WUTR

wakeup timer register

Offset: 0x14, reset: 0x0000FFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WUT
rw
Toggle Fields.

WUT

Bits 0-15: Wakeup auto-reload value bits.

Allowed values: 0-65535

CALIBR

calibration register

Offset: 0x18, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DCS
rw 		DC
rw
Toggle Fields.

DC

Bits 0-4: Digital calibration.

DCS

Bit 7: Digital calibration sign.

ALRMAR

alarm A register

Offset: 0x1C, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSK4
rw 		WDSEL
rw 		DT
rw 		DU
rw 		MSK3
rw 		PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSK2
rw 		MNT
rw 		MNU
rw 		MSK1
rw 		ST
rw 		SU
rw
Toggle Fields.

SU

Bits 0-3: Second units in BCD format.

Allowed values: 0-15

ST

Bits 4-6: Second tens in BCD format.

Allowed values: 0-7

MSK1

Bit 7: Alarm A seconds mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

MNU

Bits 8-11: Minute units in BCD format.

Allowed values: 0-15

MNT

Bits 12-14: Minute tens in BCD format.

Allowed values: 0-7

MSK2

Bit 15: Alarm A minutes mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

HU

Bits 16-19: Hour units in BCD format.

Allowed values: 0-15

HT

Bits 20-21: Hour tens in BCD format.

Allowed values: 0-3

PM

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

MSK3

Bit 23: Alarm A hours mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

DU

Bits 24-27: Date units or day in BCD format.

Allowed values: 0-15

DT

Bits 28-29: Date tens in BCD format.

Allowed values: 0-3

WDSEL

Bit 30: Week day selection.

Allowed values:
0: DateUnits: DU[3:0] represents the date units
1: WeekDay: DU[3:0] represents the week day. DT[1:0] is don’t care.

MSK4

Bit 31: Alarm A date mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

ALRMBR

alarm B register

Offset: 0x20, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSK4
rw 		WDSEL
rw 		DT
rw 		DU
rw 		MSK3
rw 		PM
rw 		HT
rw 		HU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSK2
rw 		MNT
rw 		MNU
rw 		MSK1
rw 		ST
rw 		SU
rw
Toggle Fields.

SU

Bits 0-3: Second units in BCD format.

Allowed values: 0-15

ST

Bits 4-6: Second tens in BCD format.

Allowed values: 0-7

MSK1

Bit 7: Alarm B seconds mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

MNU

Bits 8-11: Minute units in BCD format.

Allowed values: 0-15

MNT

Bits 12-14: Minute tens in BCD format.

Allowed values: 0-7

MSK2

Bit 15: Alarm B minutes mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

HU

Bits 16-19: Hour units in BCD format.

Allowed values: 0-15

HT

Bits 20-21: Hour tens in BCD format.

Allowed values: 0-3

PM

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

MSK3

Bit 23: Alarm B hours mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

DU

Bits 24-27: Date units or day in BCD format.

Allowed values: 0-15

DT

Bits 28-29: Date tens in BCD format.

Allowed values: 0-3

WDSEL

Bit 30: Week day selection.

Allowed values:
0: DateUnits: DU[3:0] represents the date units
1: WeekDay: DU[3:0] represents the week day. DT[1:0] is don’t care.

MSK4

Bit 31: Alarm B date mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

WPR

write protection register

Offset: 0x24, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields.

KEY

Bits 0-7: Write protection key.

Allowed values: 0-255

SSR

sub second register

Offset: 0x28, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
r
Toggle Fields.

SS

Bits 0-15: Sub second value.

Allowed values: 0-65535

SHIFTR

shift control register

Offset: 0x2C, reset: 0x00000000, access: write-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADD1S
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SUBFS
w
Toggle Fields.

SUBFS

Bits 0-14: Subtract a fraction of a second.

Allowed values: 0-32767

ADD1S

Bit 31: Add one second.

Allowed values:
1: Add1: Add one second to the clock/calendar

TSTR

time stamp time register

Offset: 0x30, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
r 		HT
r 		HU
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
r 		MNU
r 		ST
r 		SU
r
Toggle Fields.

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

TSDR

time stamp date register

Offset: 0x34, reset: 0x00000000, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDU
r 		MT
r 		MU
r 		DT
r 		DU
r
Toggle Fields.

DU

Bits 0-3: Date units in BCD format.

DT

Bits 4-5: Date tens in BCD format.

MU

Bits 8-11: Month units in BCD format.

MT

Bit 12: Month tens in BCD format.

WDU

Bits 13-15: Week day units.

TSSSR

timestamp sub second register

Offset: 0x38, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
r
Toggle Fields.

SS

Bits 0-15: Sub second value.

CALR

calibration register

Offset: 0x3C, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CALP
rw 		CALW8
rw 		CALW16
rw 		CALM
rw
Toggle Fields.

CALM

Bits 0-8: Calibration minus.

Allowed values: 0-511

CALW16

Bit 13: Use a 16-second calibration cycle period.

Allowed values:
1: Sixteen_Second: When CALW16 is set to ‘1’, the 16-second calibration cycle period is selected.This bit must not be set to ‘1’ if CALW8=1

CALW8

Bit 14: Use an 8-second calibration cycle period.

Allowed values:
1: Eight_Second: When CALW8 is set to ‘1’, the 8-second calibration cycle period is selected

CALP

Bit 15: Increase frequency of RTC by 488.5 ppm.

Allowed values:
0: NoChange: No RTCCLK pulses are added
1: IncreaseFreq: One RTCCLK pulse is effectively inserted every 2^11 pulses (frequency increased by 488.5 ppm)

TAFCR

tamper and alternate function configuration register

Offset: 0x40, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ALARMOUTTYPE
rw 		TSINSEL
rw 		TAMP1INSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAMPPUDIS
rw 		TAMPPRCH
rw 		TAMPFLT
rw 		TAMPFREQ
rw 		TAMPTS
rw 		TAMP2TRG
rw 		TAMP2E
rw 		TAMPIE
rw 		TAMP1TRG
rw 		TAMP1E
rw
Toggle Fields.

TAMP1E

Bit 0: Tamper 1 detection enable.

TAMP1TRG

Bit 1: Active level for tamper 1.

TAMPIE

Bit 2: Tamper interrupt enable.

TAMP2E

Bit 3: Tamper 2 detection enable.

TAMP2TRG

Bit 4: Active level for tamper 2.

TAMPTS

Bit 7: Activate timestamp on tamper detection event.

TAMPFREQ

Bits 8-10: Tamper sampling frequency.

TAMPFLT

Bits 11-12: Tamper filter count.

TAMPPRCH

Bits 13-14: Tamper precharge duration.

TAMPPUDIS

Bit 15: TAMPER pull-up disable.

TAMP1INSEL

Bit 16: TAMPER1 mapping.

TSINSEL

Bit 17: TIMESTAMP mapping.

ALARMOUTTYPE

Bit 18: AFO_ALARM output type.

ALRMASSR

alarm A sub second register

Offset: 0x44, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MASKSS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
rw
Toggle Fields.

SS

Bits 0-14: Sub seconds value.

Allowed values: 0-32767

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

Allowed values: 0-15

ALRMBSSR

alarm B sub second register

Offset: 0x48, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MASKSS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SS
rw
Toggle Fields.

SS

Bits 0-14: Sub seconds value.

Allowed values: 0-32767

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

Allowed values: 0-15

BKP%sR

backup register

Offset: 0x50, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKP
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKP
rw
Toggle Fields.

BKP

Bits 0-31: BKP.

Allowed values: 0-4294967295

SCB

0xE000ED00: System control block

5/74 fields covered. Toggle Registers.

CPUID

CPUID base register

Offset: 0x0, reset: 0x410FC241, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Implementer
r 		Variant
r 		Constant
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PartNo
r 		Revision
r
Toggle Fields.

Revision

Bits 0-3: Revision number.

PartNo

Bits 4-15: Part number of the processor.

Constant

Bits 16-19: Reads as 0xF.

Variant

Bits 20-23: Variant number.

Implementer

Bits 24-31: Implementer code.

ICSR

Interrupt control and state register

Offset: 0x4, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NMIPENDSET
rw 		PENDSVSET
rw 		PENDSVCLR
rw 		PENDSTSET
rw 		PENDSTCLR
rw 		ISRPENDING
rw 		VECTPENDING
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VECTPENDING
rw 		RETTOBASE
rw 		VECTACTIVE
rw
Toggle Fields.

VECTACTIVE

Bits 0-8: Active vector.

RETTOBASE

Bit 11: Return to base level.

VECTPENDING

Bits 12-18: Pending vector.

ISRPENDING

Bit 22: Interrupt pending flag.

PENDSTCLR

Bit 25: SysTick exception clear-pending bit.

PENDSTSET

Bit 26: SysTick exception set-pending bit.

PENDSVCLR

Bit 27: PendSV clear-pending bit.

PENDSVSET

Bit 28: PendSV set-pending bit.

NMIPENDSET

Bit 31: NMI set-pending bit..

VTOR

Vector table offset register

Offset: 0x8, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TBLOFF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TBLOFF
rw
Toggle Fields.

TBLOFF

Bits 9-29: Vector table base offset field.

AIRCR

Application interrupt and reset control register

Offset: 0xC, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VECTKEYSTAT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ENDIANESS
rw 		PRIGROUP
rw 		SYSRESETREQ
rw 		VECTCLRACTIVE
rw 		VECTRESET
rw
Toggle Fields.

VECTRESET

Bit 0: VECTRESET.

VECTCLRACTIVE

Bit 1: VECTCLRACTIVE.

SYSRESETREQ

Bit 2: SYSRESETREQ.

PRIGROUP

Bits 8-10: PRIGROUP.

ENDIANESS

Bit 15: ENDIANESS.

VECTKEYSTAT

Bits 16-31: Register key.

SCR

System control register

Offset: 0x10, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEVEONPEND
rw 		SLEEPDEEP
rw 		SLEEPONEXIT
rw
Toggle Fields.

SLEEPONEXIT

Bit 1: SLEEPONEXIT.

SLEEPDEEP

Bit 2: SLEEPDEEP.

SEVEONPEND

Bit 4: Send Event on Pending bit.

CCR

Configuration and control register

Offset: 0x14, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STKALIGN
rw 		BFHFNMIGN
rw 		DIV_0_TRP
rw 		UNALIGN__TRP
rw 		USERSETMPEND
rw 		NONBASETHRDENA
rw
Toggle Fields.

NONBASETHRDENA

Bit 0: Configures how the processor enters Thread mode.

USERSETMPEND

Bit 1: USERSETMPEND.

UNALIGN__TRP

Bit 3: UNALIGN_ TRP.

DIV_0_TRP

Bit 4: DIV_0_TRP.

BFHFNMIGN

Bit 8: BFHFNMIGN.

STKALIGN

Bit 9: STKALIGN.

SHPR1

System handler priority registers

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_5
rw 		PRI_4
rw
Toggle Fields.

PRI_4

Bits 0-7: Priority of system handler 4.

PRI_5

Bits 8-15: Priority of system handler 5.

PRI_6

Bits 16-23: Priority of system handler 6.

SHPR2

System handler priority registers

Offset: 0x1C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_11
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

PRI_11

Bits 24-31: Priority of system handler 11.

SHPR3

System handler priority registers

Offset: 0x20, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PRI_15
rw 		PRI_14
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

PRI_14

Bits 16-23: Priority of system handler 14.

PRI_15

Bits 24-31: Priority of system handler 15.

SHCRS

System handler control and state register

Offset: 0x24, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
USGFAULTENA
rw 		BUSFAULTENA
rw 		MEMFAULTENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SVCALLPENDED
rw 		BUSFAULTPENDED
rw 		MEMFAULTPENDED
rw 		USGFAULTPENDED
rw 		SYSTICKACT
rw 		PENDSVACT
rw 		MONITORACT
rw 		SVCALLACT
rw 		USGFAULTACT
rw 		BUSFAULTACT
rw 		MEMFAULTACT
rw
Toggle Fields.

MEMFAULTACT

Bit 0: Memory management fault exception active bit.

BUSFAULTACT

Bit 1: Bus fault exception active bit.

USGFAULTACT

Bit 3: Usage fault exception active bit.

SVCALLACT

Bit 7: SVC call active bit.

MONITORACT

Bit 8: Debug monitor active bit.

PENDSVACT

Bit 10: PendSV exception active bit.

SYSTICKACT

Bit 11: SysTick exception active bit.

USGFAULTPENDED

Bit 12: Usage fault exception pending bit.

MEMFAULTPENDED

Bit 13: Memory management fault exception pending bit.

BUSFAULTPENDED

Bit 14: Bus fault exception pending bit.

SVCALLPENDED

Bit 15: SVC call pending bit.

MEMFAULTENA

Bit 16: Memory management fault enable bit.

BUSFAULTENA

Bit 17: Bus fault enable bit.

USGFAULTENA

Bit 18: Usage fault enable bit.

CFSR_UFSR_BFSR_MMFSR

Configurable fault status register

Offset: 0x28, reset: 0x00000000, access: read-write

0/18 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DIVBYZERO
rw 		UNALIGNED
rw 		NOCP
rw 		INVPC
rw 		INVSTATE
rw 		UNDEFINSTR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BFARVALID
rw 		LSPERR
rw 		STKERR
rw 		UNSTKERR
rw 		IMPRECISERR
rw 		PRECISERR
rw 		IBUSERR
rw 		MMARVALID
rw 		MLSPERR
rw 		MSTKERR
rw 		MUNSTKERR
rw 		IACCVIOL
rw
Toggle Fields.

IACCVIOL

Bit 1: Instruction access violation flag.

MUNSTKERR

Bit 3: Memory manager fault on unstacking for a return from exception.

MSTKERR

Bit 4: Memory manager fault on stacking for exception entry..

MLSPERR

Bit 5: MLSPERR.

MMARVALID

Bit 7: Memory Management Fault Address Register (MMAR) valid flag.

IBUSERR

Bit 8: Instruction bus error.

PRECISERR

Bit 9: Precise data bus error.

IMPRECISERR

Bit 10: Imprecise data bus error.

UNSTKERR

Bit 11: Bus fault on unstacking for a return from exception.

STKERR

Bit 12: Bus fault on stacking for exception entry.

LSPERR

Bit 13: Bus fault on floating-point lazy state preservation.

BFARVALID

Bit 15: Bus Fault Address Register (BFAR) valid flag.

UNDEFINSTR

Bit 16: Undefined instruction usage fault.

INVSTATE

Bit 17: Invalid state usage fault.

INVPC

Bit 18: Invalid PC load usage fault.

NOCP

Bit 19: No coprocessor usage fault..

UNALIGNED

Bit 24: Unaligned access usage fault.

DIVBYZERO

Bit 25: Divide by zero usage fault.

HFSR

Hard fault status register

Offset: 0x2C, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DEBUG_VT
rw 		FORCED
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VECTTBL
rw
Toggle Fields.

VECTTBL

Bit 1: Vector table hard fault.

FORCED

Bit 30: Forced hard fault.

DEBUG_VT

Bit 31: Reserved for Debug use.

MMFAR

Memory management fault address register

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MMFAR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MMFAR
rw
Toggle Fields.

MMFAR

Bits 0-31: Memory management fault address.

BFAR

Bus fault address register

Offset: 0x38, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BFAR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BFAR
rw
Toggle Fields.

BFAR

Bits 0-31: Bus fault address.

AFSR

Auxiliary fault status register

Offset: 0x3C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IMPDEF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IMPDEF
rw
Toggle Fields.

IMPDEF

Bits 0-31: Implementation defined.

SCB_ACTRL

0xE000E008: System control block ACTLR

0/5 fields covered. Toggle Registers.

ACTRL

Auxiliary control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DISOOFP
rw 		DISFPCA
rw 		DISFOLD
rw 		DISDEFWBUF
rw 		DISMCYCINT
rw
Toggle Fields.

DISMCYCINT

Bit 0: DISMCYCINT.

DISDEFWBUF

Bit 1: DISDEFWBUF.

DISFOLD

Bit 2: DISFOLD.

DISFPCA

Bit 8: DISFPCA.

DISOOFP

Bit 9: DISOOFP.

SDIO

0x40012C00: Secure digital input/output interface

31/98 fields covered. Toggle Registers.

POWER

power control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PWRCTRL
rw
Toggle Fields.

PWRCTRL

Bits 0-1: PWRCTRL.

CLKCR

SDI clock control register

Offset: 0x4, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HWFC_EN
rw 		NEGEDGE
rw 		WIDBUS
rw 		BYPASS
rw 		PWRSAV
rw 		CLKEN
rw 		CLKDIV
rw
Toggle Fields.

CLKDIV

Bits 0-7: Clock divide factor.

CLKEN

Bit 8: Clock enable bit.

PWRSAV

Bit 9: Power saving configuration bit.

BYPASS

Bit 10: Clock divider bypass enable bit.

WIDBUS

Bits 11-12: Wide bus mode enable bit.

NEGEDGE

Bit 13: SDIO_CK dephasing selection bit.

HWFC_EN

Bit 14: HW Flow Control enable.

ARG

argument register

Offset: 0x8, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CMDARG
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMDARG
rw
Toggle Fields.

CMDARG

Bits 0-31: Command argument.

CMD

command register

Offset: 0xC, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CE_ATACMD
rw 		nIEN
rw 		ENCMDcompl
rw 		SDIOSuspend
rw 		CPSMEN
rw 		WAITPEND
rw 		WAITINT
rw 		WAITRESP
rw 		CMDINDEX
rw
Toggle Fields.

CMDINDEX

Bits 0-5: Command index.

WAITRESP

Bits 6-7: Wait for response bits.

WAITINT

Bit 8: CPSM waits for interrupt request.

WAITPEND

Bit 9: CPSM Waits for ends of data transfer (CmdPend internal signal)..

CPSMEN

Bit 10: Command path state machine (CPSM) Enable bit.

SDIOSuspend

Bit 11: SD I/O suspend command.

ENCMDcompl

Bit 12: Enable CMD completion.

nIEN

Bit 13: not Interrupt Enable.

CE_ATACMD

Bit 14: CE-ATA command.

RESPCMD

command response register

Offset: 0x10, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESPCMD
r
Toggle Fields.

RESPCMD

Bits 0-5: Response command index.

RESP1

response 1..4 register

Offset: 0x14, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CARDSTATUS1
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CARDSTATUS1
r
Toggle Fields.

CARDSTATUS1

Bits 0-31: Card Status.

RESP2

response 1..4 register

Offset: 0x18, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CARDSTATUS2
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CARDSTATUS2
r
Toggle Fields.

CARDSTATUS2

Bits 0-31: Card Status.

RESP3

response 1..4 register

Offset: 0x1C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CARDSTATUS3
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CARDSTATUS3
r
Toggle Fields.

CARDSTATUS3

Bits 0-31: Card Status.

RESP4

response 1..4 register

Offset: 0x20, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CARDSTATUS4
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CARDSTATUS4
r
Toggle Fields.

CARDSTATUS4

Bits 0-31: Card Status.

DTIMER

data timer register

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATATIME
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATATIME
rw
Toggle Fields.

DATATIME

Bits 0-31: Data timeout period.

DLEN

data length register

Offset: 0x28, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATALENGTH
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATALENGTH
rw
Toggle Fields.

DATALENGTH

Bits 0-24: Data length value.

DCTRL

data control register

Offset: 0x2C, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SDIOEN
rw 		RWMOD
rw 		RWSTOP
rw 		RWSTART
rw 		DBLOCKSIZE
rw 		DMAEN
rw 		DTMODE
rw 		DTDIR
rw 		DTEN
rw
Toggle Fields.

DTEN

Bit 0: DTEN.

DTDIR

Bit 1: Data transfer direction selection.

DTMODE

Bit 2: Data transfer mode selection 1: Stream or SDIO multibyte data transfer..

DMAEN

Bit 3: DMA enable bit.

DBLOCKSIZE

Bits 4-7: Data block size.

RWSTART

Bit 8: Read wait start.

RWSTOP

Bit 9: Read wait stop.

RWMOD

Bit 10: Read wait mode.

SDIOEN

Bit 11: SD I/O enable functions.

DCOUNT

data counter register

Offset: 0x30, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATACOUNT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATACOUNT
r
Toggle Fields.

DATACOUNT

Bits 0-24: Data count value.

STA

status register

Offset: 0x34, reset: 0x00000000, access: read-only

24/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CEATAEND
r 		SDIOIT
r 		RXDAVL
r 		TXDAVL
r 		RXFIFOE
r 		TXFIFOE
r 		RXFIFOF
r 		TXFIFOF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXFIFOHF
r 		TXFIFOHE
r 		RXACT
r 		TXACT
r 		CMDACT
r 		DBCKEND
r 		STBITERR
r 		DATAEND
r 		CMDSENT
r 		CMDREND
r 		RXOVERR
r 		TXUNDERR
r 		DTIMEOUT
r 		CTIMEOUT
r 		DCRCFAIL
r 		CCRCFAIL
r
Toggle Fields.

CCRCFAIL

Bit 0: Command response received (CRC check failed).

DCRCFAIL

Bit 1: Data block sent/received (CRC check failed).

CTIMEOUT

Bit 2: Command response timeout.

DTIMEOUT

Bit 3: Data timeout.

TXUNDERR

Bit 4: Transmit FIFO underrun error.

RXOVERR

Bit 5: Received FIFO overrun error.

CMDREND

Bit 6: Command response received (CRC check passed).

CMDSENT

Bit 7: Command sent (no response required).

DATAEND

Bit 8: Data end (data counter, SDIDCOUNT, is zero).

STBITERR

Bit 9: Start bit not detected on all data signals in wide bus mode.

DBCKEND

Bit 10: Data block sent/received (CRC check passed).

CMDACT

Bit 11: Command transfer in progress.

TXACT

Bit 12: Data transmit in progress.

RXACT

Bit 13: Data receive in progress.

TXFIFOHE

Bit 14: Transmit FIFO half empty: at least 8 words can be written into the FIFO.

RXFIFOHF

Bit 15: Receive FIFO half full: there are at least 8 words in the FIFO.

TXFIFOF

Bit 16: Transmit FIFO full.

RXFIFOF

Bit 17: Receive FIFO full.

TXFIFOE

Bit 18: Transmit FIFO empty.

RXFIFOE

Bit 19: Receive FIFO empty.

TXDAVL

Bit 20: Data available in transmit FIFO.

RXDAVL

Bit 21: Data available in receive FIFO.

SDIOIT

Bit 22: SDIO interrupt received.

CEATAEND

Bit 23: CE-ATA command completion signal received for CMD61.

ICR

interrupt clear register

Offset: 0x38, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CEATAENDC
rw 		SDIOITC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBCKENDC
rw 		STBITERRC
rw 		DATAENDC
rw 		CMDSENTC
rw 		CMDRENDC
rw 		RXOVERRC
rw 		TXUNDERRC
rw 		DTIMEOUTC
rw 		CTIMEOUTC
rw 		DCRCFAILC
rw 		CCRCFAILC
rw
Toggle Fields.

CCRCFAILC

Bit 0: CCRCFAIL flag clear bit.

DCRCFAILC

Bit 1: DCRCFAIL flag clear bit.

CTIMEOUTC

Bit 2: CTIMEOUT flag clear bit.

DTIMEOUTC

Bit 3: DTIMEOUT flag clear bit.

TXUNDERRC

Bit 4: TXUNDERR flag clear bit.

RXOVERRC

Bit 5: RXOVERR flag clear bit.

CMDRENDC

Bit 6: CMDREND flag clear bit.

CMDSENTC

Bit 7: CMDSENT flag clear bit.

DATAENDC

Bit 8: DATAEND flag clear bit.

STBITERRC

Bit 9: STBITERR flag clear bit.

DBCKENDC

Bit 10: DBCKEND flag clear bit.

SDIOITC

Bit 22: SDIOIT flag clear bit.

CEATAENDC

Bit 23: CEATAEND flag clear bit.

MASK

mask register

Offset: 0x3C, reset: 0x00000000, access: read-write

0/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CEATAENDIE
rw 		SDIOITIE
rw 		RXDAVLIE
rw 		TXDAVLIE
rw 		RXFIFOEIE
rw 		TXFIFOEIE
rw 		RXFIFOFIE
rw 		TXFIFOFIE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXFIFOHFIE
rw 		TXFIFOHEIE
rw 		RXACTIE
rw 		TXACTIE
rw 		CMDACTIE
rw 		DBCKENDIE
rw 		STBITERRIE
rw 		DATAENDIE
rw 		CMDSENTIE
rw 		CMDRENDIE
rw 		RXOVERRIE
rw 		TXUNDERRIE
rw 		DTIMEOUTIE
rw 		CTIMEOUTIE
rw 		DCRCFAILIE
rw 		CCRCFAILIE
rw
Toggle Fields.

CCRCFAILIE

Bit 0: Command CRC fail interrupt enable.

DCRCFAILIE

Bit 1: Data CRC fail interrupt enable.

CTIMEOUTIE

Bit 2: Command timeout interrupt enable.

DTIMEOUTIE

Bit 3: Data timeout interrupt enable.

TXUNDERRIE

Bit 4: Tx FIFO underrun error interrupt enable.

RXOVERRIE

Bit 5: Rx FIFO overrun error interrupt enable.

CMDRENDIE

Bit 6: Command response received interrupt enable.

CMDSENTIE

Bit 7: Command sent interrupt enable.

DATAENDIE

Bit 8: Data end interrupt enable.

STBITERRIE

Bit 9: Start bit error interrupt enable.

DBCKENDIE

Bit 10: Data block end interrupt enable.

CMDACTIE

Bit 11: Command acting interrupt enable.

TXACTIE

Bit 12: Data transmit acting interrupt enable.

RXACTIE

Bit 13: Data receive acting interrupt enable.

TXFIFOHEIE

Bit 14: Tx FIFO half empty interrupt enable.

RXFIFOHFIE

Bit 15: Rx FIFO half full interrupt enable.

TXFIFOFIE

Bit 16: Tx FIFO full interrupt enable.

RXFIFOFIE

Bit 17: Rx FIFO full interrupt enable.

TXFIFOEIE

Bit 18: Tx FIFO empty interrupt enable.

RXFIFOEIE

Bit 19: Rx FIFO empty interrupt enable.

TXDAVLIE

Bit 20: Data available in Tx FIFO interrupt enable.

RXDAVLIE

Bit 21: Data available in Rx FIFO interrupt enable.

SDIOITIE

Bit 22: SDIO mode interrupt received interrupt enable.

CEATAENDIE

Bit 23: CE-ATA command completion signal received interrupt enable.

FIFOCNT

FIFO counter register

Offset: 0x48, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FIFOCOUNT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FIFOCOUNT
r
Toggle Fields.

FIFOCOUNT

Bits 0-23: Remaining number of words to be written to or read from the FIFO..

FIFO

data FIFO register

Offset: 0x80, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FIFOData
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FIFOData
rw
Toggle Fields.

FIFOData

Bits 0-31: Receive and transmit FIFO data.

SPI1

0x40013000: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

SPI2

0x40003800: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

SPI3

0x40003C00: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

SPI4

0x40013400: Serial peripheral interface

45/45 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BIDIMODE
rw 		BIDIOE
rw 		CRCEN
rw 		CRCNEXT
rw 		DFF
rw 		RXONLY
rw 		SSM
rw 		SSI
rw 		LSBFIRST
rw 		SPE
rw 		BR
rw 		MSTR
rw 		CPOL
rw 		CPHA
rw
Toggle Fields.

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

DFF

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXEIE
rw 		RXNEIE
rw 		ERRIE
rw 		FRF
rw 		SSOE
rw 		TXDMAEN
rw 		RXDMAEN
rw
Toggle Fields.

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

SR

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FRE
r 		BSY
r 		OVR
r 		MODF
r 		CRCERR
rw 		UDR
r 		CHSIDE
r 		TXE
r 		RXNE
r
Toggle Fields.

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: TI frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

DR

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPR

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RXCRCR

RX CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RxCRC
r
Toggle Fields.

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0-65535

TXCRCR

TX CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TxCRC
r
Toggle Fields.

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0-65535

I2SCFGR

I2S configuration register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SMOD
rw 		I2SE
rw 		I2SCFG
rw 		PCMSYNC
rw 		I2SSTD
rw 		CKPOL
rw 		DATLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, reset: 00000010, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOE
rw 		ODD
rw 		I2SDIV
rw
Toggle Fields.

I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 2-255

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

STK

0xE000E010: SysTick timer

0/9 fields covered. Toggle Registers.

CTRL

SysTick control and status register

Offset: 0x0, reset: 0X00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
COUNTFLAG
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLKSOURCE
rw 		TICKINT
rw 		ENABLE
rw
Toggle Fields.

ENABLE

Bit 0: Counter enable.

TICKINT

Bit 1: SysTick exception request enable.

CLKSOURCE

Bit 2: Clock source selection.

COUNTFLAG

Bit 16: COUNTFLAG.

LOAD

SysTick reload value register

Offset: 0x4, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RELOAD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RELOAD
rw
Toggle Fields.

RELOAD

Bits 0-23: RELOAD value.

VAL

SysTick current value register

Offset: 0x8, reset: 0X00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CURRENT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CURRENT
rw
Toggle Fields.

CURRENT

Bits 0-23: Current counter value.

CALIB

SysTick calibration value register

Offset: 0xC, reset: 0X00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
NOREF
rw 		SKEW
rw 		TENMS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TENMS
rw
Toggle Fields.

TENMS

Bits 0-23: Calibration value.

SKEW

Bit 30: SKEW flag: Indicates whether the TENMS value is exact.

NOREF

Bit 31: NOREF flag. Reads as zero.

SYSCFG

0x40013800: System configuration controller

2/20 fields covered. Toggle Registers.

MEMRM

memory remap register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MEM_MODE
rw
Toggle Fields.

MEM_MODE

Bits 0-1: MEM_MODE.

PMC

peripheral mode configuration register

Offset: 0x4, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADC1DC2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

ADC1DC2

Bit 16: ADC1DC2.

EXTICR1

external interrupt configuration register 1

Offset: 0x8, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI3
rw 		EXTI2
rw 		EXTI1
rw 		EXTI0
rw
Toggle Fields.

EXTI0

Bits 0-3: EXTI x configuration (x = 0 to 3).

EXTI1

Bits 4-7: EXTI x configuration (x = 0 to 3).

EXTI2

Bits 8-11: EXTI x configuration (x = 0 to 3).

EXTI3

Bits 12-15: EXTI x configuration (x = 0 to 3).

EXTICR2

external interrupt configuration register 2

Offset: 0xC, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI7
rw 		EXTI6
rw 		EXTI5
rw 		EXTI4
rw
Toggle Fields.

EXTI4

Bits 0-3: EXTI x configuration (x = 4 to 7).

EXTI5

Bits 4-7: EXTI x configuration (x = 4 to 7).

EXTI6

Bits 8-11: EXTI x configuration (x = 4 to 7).

EXTI7

Bits 12-15: EXTI x configuration (x = 4 to 7).

EXTICR3

external interrupt configuration register 3

Offset: 0x10, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI11
rw 		EXTI10
rw 		EXTI9
rw 		EXTI8
rw
Toggle Fields.

EXTI8

Bits 0-3: EXTI x configuration (x = 8 to 11).

EXTI9

Bits 4-7: EXTI x configuration (x = 8 to 11).

EXTI10

Bits 8-11: EXTI10.

EXTI11

Bits 12-15: EXTI x configuration (x = 8 to 11).

EXTICR4

external interrupt configuration register 4

Offset: 0x14, reset: 0x0000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI15
rw 		EXTI14
rw 		EXTI13
rw 		EXTI12
rw
Toggle Fields.

EXTI12

Bits 0-3: EXTI x configuration (x = 12 to 15).

EXTI13

Bits 4-7: EXTI x configuration (x = 12 to 15).

EXTI14

Bits 8-11: EXTI x configuration (x = 12 to 15).

EXTI15

Bits 12-15: EXTI x configuration (x = 12 to 15).

CMPCR

Compensation cell control register

Offset: 0x20, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
READY
r 		CMP_PD
r
Toggle Fields.

CMP_PD

Bit 0: Compensation cell power-down.

READY

Bit 8: READY.

TIM1

0x40010000: Advanced-timers

77/124 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIS4
rw 		OIS3N
rw 		OIS3
rw 		OIS2N
rw 		OIS2
rw 		OIS1N
rw 		OIS1
rw 		TI1S
rw 		MMS
rw 		CCDS
rw 		CCUS
rw 		CCPC
rw
Toggle Fields.

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

OIS2

Bit 10: Output Idle state 2.

OIS2N

Bit 11: Output Idle state 2.

OIS3

Bit 12: Output Idle state 3.

OIS3N

Bit 13: Output Idle state 3.

OIS4

Bit 14: Output Idle state 4.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		COMDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		BIE
rw 		TIE
rw 		COMIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		BIF
rw 		TIF
rw 		COMIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

BIF

Bit 7: Break interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BG
w 		TG
w 		COMG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3NE
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2NE
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1NE
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NE

Bit 2: Capture/Compare 1 complementary output enable.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NE

Bit 6: Capture/Compare 2 complementary output enable.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NE

Bit 10: Capture/Compare 3 complementary output enable.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: counter value.

Allowed values: 0-65535

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0-65535

RCR

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REP
rw
Toggle Fields.

REP

Bits 0-7: Repetition counter value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

Allowed values: 0-65535

BDTR

break and dead-time register

Offset: 0x44, reset: 0x0000, access: read-write

3/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MOE
rw 		AOE
rw 		BKP
rw 		BKE
rw 		OSSR
rw 		OSSI
rw 		LOCK
rw 		DTG
rw
Toggle Fields.

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are forced to idle level

OSSR

Bit 11: Off-state selection for Run mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are enabled with their inactive level

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

Allowed values:
0: DisabledIdle: OC/OCN are disabled or forced idle depending on OSSI
1: Enabled: OC/OCN are enabled if CCxE/CCxNE are set

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

TIM10

0x40014400: General-purpose-timers

9/26 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1OF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: counter value.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

TIM11

0x40014800: General-purpose-timers

9/27 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1OF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: counter value.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

OR

option register

Offset: 0x50, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RMP
rw
Toggle Fields.

RMP

Bits 0-1: Input 1 remapping capability.

TIM2

0x40000000: General purpose timers

74/98 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-31: Counter value.

Allowed values: 0-4294967295

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-31: Auto-reload value.

Allowed values: 0-4294967295

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-31: Capture/Compare 1 value.

Allowed values: 0-4294967295

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

OR

TIM5 option register

Offset: 0x50, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ITR1_RMP
rw
Toggle Fields.

ITR1_RMP

Bits 10-11: Timer Input 4 remap.

TIM3

0x40000400: General purpose timers

74/100 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Counter value.

Allowed values: 0-65535

CNT_H

Bits 16-31: High counter value.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0-65535

ARR_H

Bits 16-31: High Auto-reload value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR1_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

Allowed values: 0-65535

CCR1_H

Bits 16-31: High Capture/Compare 1 value.

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

TIM4

0x40000800: General purpose timers

74/100 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Counter value.

Allowed values: 0-65535

CNT_H

Bits 16-31: High counter value.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0-65535

ARR_H

Bits 16-31: High Auto-reload value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR1_H
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

Allowed values: 0-65535

CCR1_H

Bits 16-31: High Capture/Compare 1 value.

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

TIM5

0x40000C00: General-purpose-timers

74/98 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI1S
rw 		MMS
rw 		CCDS
rw
Toggle Fields.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		TIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4NP
rw 		CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CC4NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-31: Counter value.

Allowed values: 0-4294967295

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ARR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-31: Auto-reload value.

Allowed values: 0-4294967295

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CCR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-31: Capture/Compare 1 value.

Allowed values: 0-4294967295

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

OR

TIM5 option register

Offset: 0x50, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IT4_RMP
rw
Toggle Fields.

IT4_RMP

Bits 6-7: Timer Input 4 remap.

TIM8

0x40010400: Advanced-timers

77/124 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		CMS
rw 		DIR
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

3/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OIS4
rw 		OIS3N
rw 		OIS3
rw 		OIS2N
rw 		OIS2
rw 		OIS1N
rw 		OIS1
rw 		TI1S
rw 		MMS
rw 		CCDS
rw 		CCUS
rw 		CCPC
rw
Toggle Fields.

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

OIS2

Bit 10: Output Idle state 2.

OIS2N

Bit 11: Output Idle state 2.

OIS3

Bit 12: Output Idle state 3.

OIS3N

Bit 13: Output Idle state 3.

OIS4

Bit 14: Output Idle state 4.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		ECE
rw 		ETPS
rw 		ETF
rw 		MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDE
rw 		COMDE
rw 		CC4DE
rw 		CC3DE
rw 		CC2DE
rw 		CC1DE
rw 		UDE
rw 		BIE
rw 		TIE
rw 		COMIE
rw 		CC4IE
rw 		CC3IE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC3IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC4IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC1DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC2DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC3DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC4DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

10/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4OF
rw 		CC3OF
rw 		CC2OF
rw 		CC1OF
rw 		BIF
rw 		TIF
rw 		COMIF
rw 		CC4IF
rw 		CC3IF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC3IF

Bit 3: Capture/Compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC4IF

Bit 4: Capture/Compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

BIF

Bit 7: Break interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC3OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC4OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BG
w 		TG
w 		COMG
w 		CC4G
w 		CC3G
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC2G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC3G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC4G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

4/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-15: Input capture 2 filter.

Allowed values: 0-15

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1C, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC4F
rw 		IC4PSC
rw 		CC4S
rw 		IC3F
rw 		IC3PSC
rw 		CC3S
rw
Toggle Fields.

CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC3PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0-3

IC3F

Bits 4-7: Input capture 3 filter.

Allowed values: 0-15

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC4PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0-3

IC4F

Bits 12-15: Input capture 4 filter.

Allowed values: 0-15

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC4P
rw 		CC4E
rw 		CC3NP
rw 		CC3NE
rw 		CC3P
rw 		CC3E
rw 		CC2NP
rw 		CC2NE
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1NE
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NE

Bit 2: Capture/Compare 1 complementary output enable.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NE

Bit 6: Capture/Compare 2 complementary output enable.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CC3E

Bit 8: Capture/Compare 3 output enable.

CC3P

Bit 9: Capture/Compare 3 output Polarity.

CC3NE

Bit 10: Capture/Compare 3 complementary output enable.

CC3NP

Bit 11: Capture/Compare 3 output Polarity.

CC4E

Bit 12: Capture/Compare 4 output enable.

CC4P

Bit 13: Capture/Compare 3 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: counter value.

Allowed values: 0-65535

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0-65535

RCR

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REP
rw
Toggle Fields.

REP

Bits 0-7: Repetition counter value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

Allowed values: 0-65535

BDTR

break and dead-time register

Offset: 0x44, reset: 0x0000, access: read-write

3/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MOE
rw 		AOE
rw 		BKP
rw 		BKE
rw 		OSSR
rw 		OSSI
rw 		LOCK
rw 		DTG
rw
Toggle Fields.

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are forced to idle level

OSSR

Bit 11: Off-state selection for Run mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are enabled with their inactive level

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

Allowed values:
0: DisabledIdle: OC/OCN are disabled or forced idle depending on OSSI
1: Enabled: OC/OCN are enabled if CCxE/CCxNE are set

DCR

DMA control register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DBL
rw 		DBA
rw
Toggle Fields.

DBA

Bits 0-4: DMA base address.

Allowed values: 0-31

DBL

Bits 8-12: DMA burst length.

Allowed values: 0-18

DMAR

DMA address for full transfer

Offset: 0x4C, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMAB
rw
Toggle Fields.

DMAB

Bits 0-15: DMA register for burst accesses.

TIM9

0x40014000: General purpose timers

10/48 fields covered. Toggle Registers.

CR1

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKD
rw 		ARPE
rw 		OPM
rw 		URS
rw 		UDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, reset: 0x0000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MMS
rw
Toggle Fields.

MMS

Bits 4-6: Master mode selection.

SMCR

slave mode control register

Offset: 0x8, reset: 0x0000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSM
rw 		TS
rw 		SMS
rw
Toggle Fields.

SMS

Bits 0-2: Slave mode selection.

TS

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

DIER

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

1/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIE
rw 		CC2IE
rw 		CC1IE
rw 		UIE
rw
Toggle Fields.

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC1IE

Bit 1: Capture/Compare 1 interrupt enable.

CC2IE

Bit 2: Capture/Compare 2 interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

SR

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC2OF
rw 		CC1OF
rw 		TIF
rw 		CC2IF
rw 		CC1IF
rw 		UIF
rw
Toggle Fields.

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update occurred
1: UpdatePending: Update interrupt pending.

CC1IF

Bit 1: Capture/compare 1 interrupt flag.

CC2IF

Bit 2: Capture/Compare 2 interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

CC1OF

Bit 9: Capture/Compare 1 overcapture flag.

CC2OF

Bit 10: Capture/compare 2 overcapture flag.

EGR

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG
w 		CC2G
w 		CC1G
w 		UG
w
Toggle Fields.

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the reigsters.

CC1G

Bit 1: Capture/compare 1 generation.

CC2G

Bit 2: Capture/compare 2 generation.

TG

Bit 6: Trigger generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IC2F
rw 		IC2PSC
rw 		CC2S
rw 		IC1F
rw 		IC1PSC
rw 		CC1S
rw
Toggle Fields.

CC1S

Bits 0-1: Capture/Compare 1 selection.

IC1PSC

Bits 2-3: Input capture 1 prescaler.

IC1F

Bits 4-6: Input capture 1 filter.

CC2S

Bits 8-9: Capture/Compare 2 selection.

IC2PSC

Bits 10-11: Input capture 2 prescaler.

IC2F

Bits 12-14: Input capture 2 filter.

CCER

capture/compare enable register

Offset: 0x20, reset: 0x0000, access: read-write

0/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CC2NP
rw 		CC2P
rw 		CC2E
rw 		CC1NP
rw 		CC1P
rw 		CC1E
rw
Toggle Fields.

CC1E

Bit 0: Capture/Compare 1 output enable.

CC1P

Bit 1: Capture/Compare 1 output Polarity.

CC1NP

Bit 3: Capture/Compare 1 output Polarity.

CC2E

Bit 4: Capture/Compare 2 output enable.

CC2P

Bit 5: Capture/Compare 2 output Polarity.

CC2NP

Bit 7: Capture/Compare 2 output Polarity.

CNT

counter

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: counter value.

PSC

prescaler

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value.

Allowed values: 0-65535

ARR

auto-reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARR
rw
Toggle Fields.

ARR

Bits 0-15: Auto-reload value.

CCR%s

capture/compare register 1

Offset: 0x34, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CCR
rw
Toggle Fields.

CCR

Bits 0-15: Capture/Compare 1 value.

USART1

0x40011000: Universal synchronous asynchronous receiver transmitter

44/51 fields covered. Toggle Registers.

SR

Status register

Offset: 0x0, reset: 0x00C00000, access: Unspecified

6/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTS
rw 		LBD
rw 		TXE
r 		TC
rw 		RXNE
rw 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields.

PE

Bit 0: Parity error.

FE

Bit 1: Framing error.

NF

Bit 2: Noise detected flag.

ORE

Bit 3: Overrun error.

IDLE

Bit 4: IDLE line detected.

RXNE

Bit 5: Read data register not empty.

TC

Bit 6: Transmission complete.

TXE

Bit 7: Transmit data register empty.

LBD

Bit 8: LIN break detection flag.

CTS

Bit 9: CTS flag.

DR

Data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-8: Data value.

Allowed values: 0-511

BRR

Baud rate register

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DIV_Mantissa
rw 		DIV_Fraction
rw
Toggle Fields.

DIV_Fraction

Bits 0-3: fraction of USARTDIV.

Allowed values: 0-15

DIV_Mantissa

Bits 4-15: mantissa of USARTDIV.

Allowed values: 0-4095

CR1

Control register 1

Offset: 0xC, reset: 0x0000, access: read-write

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVER8
rw 		UE
rw 		M
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		RWU
rw 		SBK
rw
Toggle Fields.

SBK

Bit 0: Send break.

Allowed values:
0: NoBreak: No break character is transmitted
1: Break: Break character transmitted

RWU

Bit 1: Receiver wakeup.

Allowed values:
0: Active: Receiver in active mode
1: Mute: Receiver in mute mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver disabled
1: Enabled: Receiver enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter disabled
1: Enabled: Transmitter enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: IDLE interrupt disabled
1: Enabled: IDLE interrupt enabled

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: RXNE interrupt disabled
1: Enabled: RXNE interrupt enabled

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: TC interrupt disabled
1: Enabled: TC interrupt enabled

TXEIE

Bit 7: TXE interrupt enable.

Allowed values:
0: Disabled: TXE interrupt disabled
1: Enabled: TXE interrupt enabled

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: PE interrupt disabled
1: Enabled: PE interrupt enabled

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Wakeup method.

Allowed values:
0: IdleLine: USART wakeup on idle line
1: AddressMark: USART wakeup on address mark

M

Bit 12: Word length.

Allowed values:
0: M8: 8 data bits
1: M9: 9 data bits

UE

Bit 13: USART enable.

Allowed values:
0: Disabled: USART prescaler and outputs disabled
1: Enabled: USART enabled

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversample16: Oversampling by 16
1: Oversample8: Oversampling by 8

CR2

Control register 2

Offset: 0x10, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LINEN
rw 		STOP
rw 		CLKEN
rw 		CPOL
rw 		CPHA
rw 		LBCL
rw 		LBDIE
rw 		LBDL
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-3: Address of the USART node.

Allowed values: 0-15

LBDL

Bit 5: lin break detection length.

Allowed values:
0: LBDL10: 10-bit break detection
1: LBDL11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: LIN break detection interrupt disabled
1: Enabled: LIN break detection interrupt enabled

LBCL

Bit 8: Last bit clock pulse.

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bits
2: Stop2: 2 stop bits
3: Stop1p5: 1.5 stop bits

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

CR3

Control register 3

Offset: 0x14, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ONEBIT
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		SCEN
rw 		NACK
rw 		HDSEL
rw 		IRLP
rw 		IREN
rw 		EIE
rw
Toggle Fields.

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: FullDuplex: Half duplex mode is not selected
1: HalfDuplex: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard mode disabled
1: Enabled: Smartcard mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS hardware flow control enabled

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS hardware flow control enabled

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: CTS interrupt disabled
1: Enabled: CTS interrupt enabled

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

GTPR

Guard time and prescaler register

Offset: 0x18, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GT
rw 		PSC
rw
Toggle Fields.

PSC

Bits 0-7: Prescaler value.

GT

Bits 8-15: Guard time value.

USART2

0x40004400: Universal synchronous asynchronous receiver transmitter

44/51 fields covered. Toggle Registers.

SR

Status register

Offset: 0x0, reset: 0x00C00000, access: Unspecified

6/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTS
rw 		LBD
rw 		TXE
r 		TC
rw 		RXNE
rw 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields.

PE

Bit 0: Parity error.

FE

Bit 1: Framing error.

NF

Bit 2: Noise detected flag.

ORE

Bit 3: Overrun error.

IDLE

Bit 4: IDLE line detected.

RXNE

Bit 5: Read data register not empty.

TC

Bit 6: Transmission complete.

TXE

Bit 7: Transmit data register empty.

LBD

Bit 8: LIN break detection flag.

CTS

Bit 9: CTS flag.

DR

Data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-8: Data value.

Allowed values: 0-511

BRR

Baud rate register

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DIV_Mantissa
rw 		DIV_Fraction
rw
Toggle Fields.

DIV_Fraction

Bits 0-3: fraction of USARTDIV.

Allowed values: 0-15

DIV_Mantissa

Bits 4-15: mantissa of USARTDIV.

Allowed values: 0-4095

CR1

Control register 1

Offset: 0xC, reset: 0x0000, access: read-write

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVER8
rw 		UE
rw 		M
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		RWU
rw 		SBK
rw
Toggle Fields.

SBK

Bit 0: Send break.

Allowed values:
0: NoBreak: No break character is transmitted
1: Break: Break character transmitted

RWU

Bit 1: Receiver wakeup.

Allowed values:
0: Active: Receiver in active mode
1: Mute: Receiver in mute mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver disabled
1: Enabled: Receiver enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter disabled
1: Enabled: Transmitter enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: IDLE interrupt disabled
1: Enabled: IDLE interrupt enabled

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: RXNE interrupt disabled
1: Enabled: RXNE interrupt enabled

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: TC interrupt disabled
1: Enabled: TC interrupt enabled

TXEIE

Bit 7: TXE interrupt enable.

Allowed values:
0: Disabled: TXE interrupt disabled
1: Enabled: TXE interrupt enabled

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: PE interrupt disabled
1: Enabled: PE interrupt enabled

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Wakeup method.

Allowed values:
0: IdleLine: USART wakeup on idle line
1: AddressMark: USART wakeup on address mark

M

Bit 12: Word length.

Allowed values:
0: M8: 8 data bits
1: M9: 9 data bits

UE

Bit 13: USART enable.

Allowed values:
0: Disabled: USART prescaler and outputs disabled
1: Enabled: USART enabled

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversample16: Oversampling by 16
1: Oversample8: Oversampling by 8

CR2

Control register 2

Offset: 0x10, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LINEN
rw 		STOP
rw 		CLKEN
rw 		CPOL
rw 		CPHA
rw 		LBCL
rw 		LBDIE
rw 		LBDL
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-3: Address of the USART node.

Allowed values: 0-15

LBDL

Bit 5: lin break detection length.

Allowed values:
0: LBDL10: 10-bit break detection
1: LBDL11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: LIN break detection interrupt disabled
1: Enabled: LIN break detection interrupt enabled

LBCL

Bit 8: Last bit clock pulse.

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bits
2: Stop2: 2 stop bits
3: Stop1p5: 1.5 stop bits

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

CR3

Control register 3

Offset: 0x14, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ONEBIT
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		SCEN
rw 		NACK
rw 		HDSEL
rw 		IRLP
rw 		IREN
rw 		EIE
rw
Toggle Fields.

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: FullDuplex: Half duplex mode is not selected
1: HalfDuplex: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard mode disabled
1: Enabled: Smartcard mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS hardware flow control enabled

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS hardware flow control enabled

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: CTS interrupt disabled
1: Enabled: CTS interrupt enabled

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

GTPR

Guard time and prescaler register

Offset: 0x18, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GT
rw 		PSC
rw
Toggle Fields.

PSC

Bits 0-7: Prescaler value.

GT

Bits 8-15: Guard time value.

USART6

0x40011400: Universal synchronous asynchronous receiver transmitter

44/51 fields covered. Toggle Registers.

SR

Status register

Offset: 0x0, reset: 0x00C00000, access: Unspecified

6/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTS
rw 		LBD
rw 		TXE
r 		TC
rw 		RXNE
rw 		IDLE
r 		ORE
r 		NF
r 		FE
r 		PE
r
Toggle Fields.

PE

Bit 0: Parity error.

FE

Bit 1: Framing error.

NF

Bit 2: Noise detected flag.

ORE

Bit 3: Overrun error.

IDLE

Bit 4: IDLE line detected.

RXNE

Bit 5: Read data register not empty.

TC

Bit 6: Transmission complete.

TXE

Bit 7: Transmit data register empty.

LBD

Bit 8: LIN break detection flag.

CTS

Bit 9: CTS flag.

DR

Data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DR
rw
Toggle Fields.

DR

Bits 0-8: Data value.

Allowed values: 0-511

BRR

Baud rate register

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DIV_Mantissa
rw 		DIV_Fraction
rw
Toggle Fields.

DIV_Fraction

Bits 0-3: fraction of USARTDIV.

Allowed values: 0-15

DIV_Mantissa

Bits 4-15: mantissa of USARTDIV.

Allowed values: 0-4095

CR1

Control register 1

Offset: 0xC, reset: 0x0000, access: read-write

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVER8
rw 		UE
rw 		M
rw 		WAKE
rw 		PCE
rw 		PS
rw 		PEIE
rw 		TXEIE
rw 		TCIE
rw 		RXNEIE
rw 		IDLEIE
rw 		TE
rw 		RE
rw 		RWU
rw 		SBK
rw
Toggle Fields.

SBK

Bit 0: Send break.

Allowed values:
0: NoBreak: No break character is transmitted
1: Break: Break character transmitted

RWU

Bit 1: Receiver wakeup.

Allowed values:
0: Active: Receiver in active mode
1: Mute: Receiver in mute mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver disabled
1: Enabled: Receiver enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter disabled
1: Enabled: Transmitter enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: IDLE interrupt disabled
1: Enabled: IDLE interrupt enabled

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: RXNE interrupt disabled
1: Enabled: RXNE interrupt enabled

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: TC interrupt disabled
1: Enabled: TC interrupt enabled

TXEIE

Bit 7: TXE interrupt enable.

Allowed values:
0: Disabled: TXE interrupt disabled
1: Enabled: TXE interrupt enabled

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: PE interrupt disabled
1: Enabled: PE interrupt enabled

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Wakeup method.

Allowed values:
0: IdleLine: USART wakeup on idle line
1: AddressMark: USART wakeup on address mark

M

Bit 12: Word length.

Allowed values:
0: M8: 8 data bits
1: M9: 9 data bits

UE

Bit 13: USART enable.

Allowed values:
0: Disabled: USART prescaler and outputs disabled
1: Enabled: USART enabled

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversample16: Oversampling by 16
1: Oversample8: Oversampling by 8

CR2

Control register 2

Offset: 0x10, reset: 0x0000, access: read-write

8/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LINEN
rw 		STOP
rw 		CLKEN
rw 		CPOL
rw 		CPHA
rw 		LBCL
rw 		LBDIE
rw 		LBDL
rw 		ADD
rw
Toggle Fields.

ADD

Bits 0-3: Address of the USART node.

Allowed values: 0-15

LBDL

Bit 5: lin break detection length.

Allowed values:
0: LBDL10: 10-bit break detection
1: LBDL11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: LIN break detection interrupt disabled
1: Enabled: LIN break detection interrupt enabled

LBCL

Bit 8: Last bit clock pulse.

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bits
2: Stop2: 2 stop bits
3: Stop1p5: 1.5 stop bits

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

CR3

Control register 3

Offset: 0x14, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ONEBIT
rw 		CTSIE
rw 		CTSE
rw 		RTSE
rw 		DMAT
rw 		DMAR
rw 		SCEN
rw 		NACK
rw 		HDSEL
rw 		IRLP
rw 		IREN
rw 		EIE
rw
Toggle Fields.

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: FullDuplex: Half duplex mode is not selected
1: HalfDuplex: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard mode disabled
1: Enabled: Smartcard mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS hardware flow control enabled

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS hardware flow control enabled

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: CTS interrupt disabled
1: Enabled: CTS interrupt enabled

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

GTPR

Guard time and prescaler register

Offset: 0x18, reset: 0x0000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GT
rw 		PSC
rw
Toggle Fields.

PSC

Bits 0-7: Prescaler value.

GT

Bits 8-15: Guard time value.

WWDG

0x40002C00: Window watchdog

6/6 fields covered. Toggle Registers.

CR

Control register

Offset: 0x0, reset: 0x7F, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDGA
rw 		T
rw
Toggle Fields.

T

Bits 0-6: 7-bit counter (MSB to LSB).

Allowed values: 0-127

WDGA

Bit 7: Activation bit.

Allowed values:
0: Disabled: Watchdog disabled
1: Enabled: Watchdog enabled

CFR

Configuration register

Offset: 0x4, reset: 0x7F, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EWI
rw 		WDGTB
rw 		W
rw
Toggle Fields.

W

Bits 0-6: 7-bit window value.

Allowed values: 0-127

WDGTB

Bits 7-8: Timer base.

Allowed values:
0: Div1: Counter clock (PCLK1 div 4096) div 1
1: Div2: Counter clock (PCLK1 div 4096) div 2
2: Div4: Counter clock (PCLK1 div 4096) div 4
3: Div8: Counter clock (PCLK1 div 4096) div 8

EWI

Bit 9: Early wakeup interrupt.

Allowed values:
1: Enable: interrupt occurs whenever the counter reaches the value 0x40

SR

Status register

Offset: 0x8, reset: 0x00, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EWIF
rw
Toggle Fields.

EWIF

Bit 0: Early wakeup interrupt flag.

Allowed values:
1: Pending: The EWI Interrupt Service Routine has been triggered
0: Finished: The EWI Interrupt Service Routine has been serviced